首页> 外文OA文献 >Ultrasound assisted process for enhanced interlaminar shear strength of carbon fiber/epoxy resin composites

【2h】

Ultrasound assisted process for enhanced interlaminar shear strength of carbon fiber/epoxy resin composites

机译：超声波辅助工艺提高碳纤维/环氧树脂复合材料的层间剪切强度

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
相似文献
相关主题

摘要

The influence of ultrasonic treatment, applied during the impregnation of carbon fiber bundle by resin system, on interface sensitive properties of carbon fiber/epoxy resin composites has been analyzed. The formation of the network has been followed on model composites containing untreated, oxidized and epoxy sized fibers by Fourier transform infrared microscopy (FTIR-microscopy) and differential scanning calorimetry (DSC). The enhanced interlaminar shear strength (ILSS), found for the composites treated by ultrasound, is attributed to the formation of more homogeneous and dense network, which is especially pronounced for epoxy sized carbon fiber composites.udKey words: carbon fibers; epoxy composites; interlaminar shear strength; ultrasound treatment

机译：分析了在树脂体系浸渍碳纤维束的过程中，超声处理对碳纤维/环氧树脂复合材料界面敏感性的影响。通过傅立叶变换红外显微镜（FTIR-显微镜）和差示扫描量热法（DSC），对包含未处理的，氧化的和环氧尺寸的纤维的模型复合材料进行网络形成。超声处理后的复合材料的层间剪切强度（ILSS）增强，这归因于形成了更均匀且致密的网络，这对于环氧胶粘碳纤维复合材料尤为明显。环氧复合材料；层间剪切强度超声波治疗

著录项

作者
Bogoeva-Gaceva Gordana; Herakovic Niko; Dimeski Dimko; Stefov Viktor;
展开▼
作者单位

展开▼
年度 2010
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Ultrasound assisted process for enhanced interlaminar shear strength of carbon fiber/epoxy resin composites [J] . Gordana Bogoeva-Gaceva, Niko Herakovi?, Dimko Dimeski, Macedonian Journal of Chemistry and Chemical Engineering . 2010,第2期

机译：超声辅助工艺可增强碳纤维/环氧树脂复合材料的层间剪切强度
2. Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites [J] . V.C.S. Chandrasekaran, S.G. Advani, M.H. Santare Carbon: An International Journal Sponsored by the American Carbon Society . 2010,第13期

机译：加工对环氧/玻璃纤维/多壁碳纳米管杂化复合材料层间剪切强度增强的作用
3. Effectively enhanced interlaminar shear strength of carbon fiber fabric/ epoxy composites by oxidized short carbon fibers at an extremely low content [J] . Nie Hui-Jie, Shen Xiao-Jun, Tang Bo-Lin, Composites Science and Technology . 2019,第Octa20期

机译：极低含量的氧化短碳纤维有效增强了碳纤维织物/环氧复合材料的层间剪切强度
4. Interlaminar shear strength of multi-walled carbon nanotube and carbon fiber reinforced, epoxy-matrix hybrid composite [C] . K. Chandra Shekar, B. Anjaneya Prasad, N. Eswara Prasad International Conference on Materials Processing and Characterisation . 2014

机译：多壁碳纳米管和碳纤维增强，环氧基质杂交复合材料的Interlaminar剪切强度
5. Role of multiwalled carbon nanotube in interlaminar shear strength of epoxy/glass fiber/multi walled carbon nanotube hybrid composites. [D] . Srinivasan Chandrasekaran, Vasan Churchill. 2011

机译：多壁碳纳米管在环氧/玻璃纤维/多壁碳纳米管杂化复合材料的层间剪切强度中的作用。
6. Surface Modification of Bamboo Fibers to Enhance the Interfacial Adhesion of Epoxy Resin-Based Composites Prepared by Resin Transfer Molding [O] . Dong Wang, Tian Bai, Wanli Cheng, 2019

机译：竹纤维的表面改性以增强树脂传递模塑法制备的环氧树脂基复合材料的界面粘合力
7. Resistência ao Cisalhamento Interlaminar de Compósitos com Resina Epóxi com Diferentes Arranjos das Fibras na Presença de Vazios Interlaminar Shear Strength of Composites with Epoxy Resin with Different Arrangement of Fibers in the Presence of Voids [O] . Michelle L. Costa, Sérgio F. M. de Almeida, Mirabel C. Rezende 2001

机译：空隙存在下纤维不同排列的环氧树脂复合材料的层间剪切强度的研究纤维存在下纤维不同排列的环氧树脂复合材料的层间剪切强度的影响
8. Improving the Interlaminar Shear Strength of Carbon Fiber-Epoxy Composites Through Carbon Fiber Bromination [R] . Jaworske, D. A., MacIag, C. 1987

机译：碳纤维溴化改善碳纤维 - 环氧复合材料的层间剪切强度

Ultrasound assisted process for enhanced interlaminar shear strength of carbon fiber/epoxy resin composites

摘要

著录项

相似文献

相关主题

期刊订阅