首页> 外文OA文献 >Synthesis of Urea-Formaldehyde Microcapsule Containing Fluororesin and Its Effect on Performances of Waterborne Coatings on Wood Surface
【2h】

Synthesis of Urea-Formaldehyde Microcapsule Containing Fluororesin and Its Effect on Performances of Waterborne Coatings on Wood Surface

机译:含氟树脂的尿​​素 - 甲醛微胶囊的合成及其对木材表面水性涂料性能的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In order to self-repair the cracks of waterborne coatings on Basswood at room temperature, with fluororesin and waterborne coatings embedded in the shell structure of urea formaldehyde (UF) resin, the microcapsules were fabricated via in-situ polymerization, and the effect of microcapsules on the chroma, gloss, mechanics and repair effect for waterborne coatings on wood was discussed. The results indicated that the coating effect was the most significant when the ratio value of the core materials to the shell material of microcapsules in mass was 0.75, and the agglomeration of particles was the least and the surface was the smoothest when the content of microcapsules was 1.0%. It was negative between the gloss of the film and microcapsule content. The ratio value of the core materials to the shell material in mass and the amount of microcapsules had great influence on the film hardness and adhesion, but had little effect on the impact resistance. When the ratio value of the core materials to the shell material of microcapsules in mass was 0.65 and the addition amount was 4.0–10.0%, the aging resistance of the film was improved most significantly. When the ratio value of the core materials to the shell material of microcapsules in mass was 0.65 and the addition amount was 7.0%, the overall properties of topcoat film on Basswood board was the most significant. It is for the application of fluororesin microcapsules possessing self-repairing effect in waterborne coating on Basswood board that a technical groundwork is provided by this study.
机译:为了在室温下自修复贝斯伍德上的水性涂料的裂缝,用尿素甲醛(UF)树脂壳结构的氟树脂和水性涂料,通过原位聚合制备微胶囊,并通过微胶囊的作用制造讨论了木材的色度,光泽,力学和修复效果。结果表明,当微胶囊的壳体材料的核心材料的比例为0.75时,涂层效果是最显着的,并且颗粒的附聚是当微胶囊的含量最短并且表面是最平滑的1.0%。薄膜和微胶囊含量的光泽之间是负的负面。核心材料与质量质量的壳材料的比率和微胶囊的量对膜硬度和粘合性产生很大影响,但对抗冲击性影响不大。当核心材料与质量微胶囊壳材料的比例为0.65时,添加量为4.0-10.0%,最显着提高了薄膜的老化抗性。当核心材料与质量微胶囊的壳材料的比例为0.65时,添加量为7.0%,贝斯伍德板上的面漆膜的总体性质最显着。它用于在贝斯伍德板上具有在水性涂层中具有自修复效果的氟树脂微胶囊,通过该研究提供了技术基础。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号