PURPOSE: To clearly visually recognize grains of a fancy veneer, to eliminate generation of bubbles and whitening by disposing two flat glasses on both side surfaces of a fancy veneer backing sheet via adhesive films, laminating and molding them. ;CONSTITUTION: A laminate 1 is formed by disposing, laminating two flat glasses 2, 2 (normal flat plates each having a thickness of 2mm) on both side surface of a fancy veneer backing sheet 3 via polyamide adhesive films 4, 4 (each having a thickness of 80m) to be molded. As the sheet 3, a veneer of camphor tree having a thickness of 0.25mm is used as a fancy veneer, and adhered with nonwoven fabric (pulp, polypropylene fiber as main materials) obtained by coating the veneer with vinyl acetate adhesive by hot press molding (under the conditions of a press temperature of 110C, a press pressure of 8kg/cm2 and a pressing time of 2min). Thus, the grains and knots of the tree can be clearly visually recognized, deeply stately tone is provided, and thickness of the laminate 1 is uniform.;COPYRIGHT: (C)1994,JPO&Japio
展开▼
机译:用途:为了清晰地视觉识别花式单板的晶粒,通过在两面单板的背面通过粘合膜放置两个平板玻璃,将它们层压和成型,从而消除气泡的产生和变白。 ;组成:层压板1是通过将两块平板玻璃2、2(通常厚度为2mm的普通平板)通过聚酰胺粘合膜4、4(分别具有厚度为80m)。作为片材3,使用厚度为0.25mm的樟树胶合板作为花式胶合板,并与通过热压成型用醋酸乙烯酯粘合剂涂布胶合板而获得的无纺布(纸浆,聚丙烯纤维为主要材料)粘合。 (在110℃的加压温度,8kg / cm 2 Sup>的加压压力和2min的加压条件下)。因此,可以清楚地看到树的纹理和结,提供深深庄重的色调,并且层压板1的厚度均匀。;版权所有:(C)1994,JPO&Japio
展开▼