【24h】

Resonant Multistage Charging of Dominant Capacitances

机译:主导电容的谐振多级充电

获取原文
获取原文并翻译 | 示例

摘要

It has been shown that adiabatic switching can significantly reduce the dynamic power dissipation in an integrated circuit. Due to the overhead in the realization of adiabatic logic blocks the best results are achieved when it is used only for charging dominant loads in an integrated circuit. It has been demonstrated that a multi stage driver is needed for minimal power dissipation. In this article a complete three stage driver including the generation of oscillating supply is described. To obtain a minimal power dissipation during synchronization the resonant frequency has to be constant. Therefore the waveforms for the logic states of the signal and the realization of a single stage differ from those presented in [4]. In the H-SPICE simulations losses of the inductor are taken into account. This allows to estimate the power reduction that is achievable in a real system.
机译:已经表明,绝热开关可以显着降低集成电路中的动态功耗。由于绝热逻辑块实现的开销,当仅将其用于集成电路中的主要负载充电时,可获得最佳结果。已经证明,需要一个多级驱动器以最小化功耗。本文介绍了一个完整的三级驱动器,包括振荡电源的产生。为了在同步期间获得最小的功耗,谐振频率必须恒定。因此,信号逻辑状态的波形和单级实现的波形与[4]中提出的波形不同。在H-SPICE仿真中,考虑了电感的损耗。这允许估计实际系统中可实现的功耗降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号