首页> 外文会议>Fatigue and fracture mechanics XXV >Fatigue Characteristic of S355J2 Steel After Surface Frictional-Mechanical Treatment in Corrosive Environment

【24h】

Fatigue Characteristic of S355J2 Steel After Surface Frictional-Mechanical Treatment in Corrosive Environment

机译：腐蚀环境下表面摩擦机械处理后S355J2钢的疲劳特性

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

In the paper low (LCF) and high cycle fatigue (HCF) behavior of the S355J2 low alloyed steel after surface frictional-mechanical treatment in a corrosive environment (3.5 % NaCl ) has been presented. The treatment was used in order to improve mechanical and fatigue properties of the steel. Obtained experimental results indicate an insignificant improvement of mechanical and fatigue properties of the strengthened steel under the conditions of corrosion at constant amplitude cyclic loading. It is particularly noticeable in the range of low-cycle fatigue.

机译：在纸中，提出了S355J2低合金钢在腐蚀环境（3.5％NaCl）中进行表面摩擦机械处理后的低（LCF）和高循环疲劳（HCF）行为。使用该处理是为了改善钢的机械性能和疲劳性能。获得的实验结果表明，在恒定振幅循环载荷下腐蚀条件下，增强钢的机械和疲劳性能没有明显改善。在低周疲劳范围内尤其明显。

著录项

来源
《Fatigue and fracture mechanics XXV》|2014年|21-26|共6页
会议地点 Fojutowo(PL)
作者
KOCANDA Dorota; G6RKA Andrzej; GRZELAK Krzysztof; TORZEWSKI Janusz; LUNARSKA Ellina; NYKYFORCHYN Hryhoriy; KYRYLIV Volodymyr;
展开▼
作者单位

Military University of Technology, 2 Gen. S. Kaliskiego Str., 00-908 Warsaw, Poland;

Military University of Technology, 2 Gen. S. Kaliskiego Str., 00-908 Warsaw, Poland;

Military University of Technology, 2 Gen. S. Kaliskiego Str., 00-908 Warsaw, Poland;

Military University of Technology, 2 Gen. S. Kaliskiego Str., 00-908 Warsaw, Poland;

Institute of Physical Chemistry, Polish Academy of Sciences, 44 Kasprzaka Str., 01-224 Warsaw, Poland;

G.V. Karpenko Physico-Mechanical Institute of NASU, 5 Naukova Str., 79060 Lviv, Ukraine;

G.V. Karpenko Physico-Mechanical Institute of NASU, 5 Naukova Str., 79060 Lviv, Ukraine;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类
关键词
surface frictional-mechanical treatment; low alloyed steel; HCF and LCF fatigue; corrosive environment.;

机译：表面摩擦机械处理；低合金钢HCF和LCF疲劳；腐蚀性环境。;

相似文献

外文文献
中文文献
专利

1. Fatigue Characteristic of S355J2 Steel After Surface Frictional-Mechan?cal Treatment in Corrosive Environment [J] . KOCA?DA Dorota, GóRKA Andrzei, GRZELAK Krzysztof, Diffusion and Defect Data. Solid State Data, Part B. Solid State Phenomena . 2015,第Null期

机译：腐蚀环境下表面摩擦机械处理后S355J2钢的疲劳特性
2. Fatigue of X65 steel in the sour corrosive environment-A novel experimentation and analysis method for predicting fatigue crack initiation life from corrosion pits [J] . Farnoosh Farhad, David Smyth-Boyle, Xiang Zhang Fatigue & fracture of engineering materials and structures . 2021,第5期

机译：酸腐蚀环境中X65钢的疲劳 - 一种新的实验和分析方法，用于预测腐蚀坑的疲劳裂纹启动寿命
3. Effect of corrosive environment on fretting fatigue strength of stainless steel - in case of setting with alumina ceramics or Austenitic stainless steel contact pads- [J] . Yoshiki Gotoh 材料 . 1998,第3期

机译：腐蚀环境对不锈钢疲劳强度的影响 - 以氧化铝陶瓷或奥氏体不锈钢接触垫设定的情况
4. Fatigue Characteristic of S355J2 Steel After Surface Frictional-Mechanical Treatment in Corrosive Environment [C] . KOCANDA Dorota, GORKA Andrzej, GRZELAK Krzysztof, Polish National Conference on Fatigue and Fracture Mechanics . 2015

机译：S355J2钢后表面摩擦机械处理疲劳特性腐蚀环境中的疲劳特性
5. A STUDY OF SURFACE METALLURGICAL CHARACTERISTICS OF TITANIUM NITROGEN COATED BEARING STEELS (CORROSION, ROLLING CONTACT FATIGUE, WEAR) [D] . ERDEMIR, ALI. 1986

机译：钛氮涂层轴承钢的表面冶金特性研究（腐蚀，滚动接触疲劳，磨损）
6. Comparative Analysis of Fatigue Energy Characteristics of S355J2 Steel Subjected to Multi-Axis Loads [O] . Cyprian T. Lachowicz, Robert Owsiński 2020

机译：S355J2钢在多轴载荷下的疲劳能特性比较分析
7. Fatigue Characteristic of S355J2 Steel After Surface Frictional- Mechanical Treatment in Corrosive Environment [O] . Kocańda Dorota, Górka Andrzej, Grzelak Krzysztof, 2015

机译：s355J2钢在腐蚀环境下表面摩擦力学处理后的疲劳特性
8. Fatigue Crack Initiation and Propagation in Steels Exposed to Inert and Corrosive Environments. Final Report, May 1, 1977--December 31, 1977 [R] . Youseffi, K., Finnie, I. 1978

机译：暴露于惰性和腐蚀环境中的钢的疲劳裂纹萌生和扩展。最终报告，1977年5月1日 - 1977年12月31日

Fatigue Characteristic of S355J2 Steel After Surface Frictional-Mechanical Treatment in Corrosive Environment

摘要

著录项

相似文献

相关主题

期刊订阅