• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XVII >Advanced, manpower and time saving testing concept for development, production and maintenance of electro-optical systems
【24h】

Advanced, manpower and time saving testing concept for development, production and maintenance of electro-optical systems

机译：用于开发，生产和维护电光系统的先进，节省人力和时间的测试概念

获取原文
获取原文并翻译 | 示例
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In all stages of an electro-optics system's life, development, production, and periodic maintenance, a large amount of manpower and time is devoted to testing. Each subsystem separately as well as the system as a whole are tested by a PC controlled test system, which consists of hardware for creation of the appropriate stimuli, and software for tests management and control. A very considerable portion of this manpower and time is devoted by the system manufacturer to configure the test routines, to manually input certain parameter values of the Unit Under Test (UUT) at predefined test nodes, and to reconfigure these routines from time to time, as the needs change during the system's life time. CI has developed the CTE (CI Test Executive), a software package which is a breakthrough in saving manpower and time devoted to electro-optics system testing. The new concept is based on: 1. The CTE can communicate directly with any UUT able to communicate with the outside world through a known protocol, to automatically set the UUT parameters before testing, 2. The user can more easily reconfigure the communication with the UUT through a provided special Excel file, without the help of the test system manufacturer, 3. The interface screen is automatically reconfigured every time the Excel file is changed to build the new test routine, 4. The CTE can simulate the test system stimuli with error injection capability, and simultaneously monitor communication and other hardware functions, 5. Test "verification" signals are provided on-line for the convenience and time saving of the test operator.
机译：在电光系统的整个寿命，开发，生产和定期维护的所有阶段，大量的人力和时间都用于测试。每个子系统以及整个系统都由PC控制的测试系统进行测试，该系统包括用于创建适当刺激的硬件以及用于测试管理和控制的软件。系统制造商将大量的人力和时间用于配置测试例程，在预定义的测试节点上手动输入待测单元（UUT）的某些参数值，并不时重新配置这些例程，在系统的整个生命周期中，需求都会发生变化。 CI开发了CTE（CI测试执行程序），该软件包是在节省用于电光系统测试的人力和时间方面的突破。新概念基于：1. CTE可以与任何能够通过已知协议与外界通信的UUT直接通信，在测试之前自动设置UUT参数； 2.用户可以更轻松地重新配置与CUT的通信。通过提供的特殊Excel文件进​​行UUT，无需测试系统制造商的帮助。3.每次更改Excel文件以构建新的测试例程时，都会自动重新配置界面屏幕。4. CTE可以使用以下命令模拟测试系统的刺激错误注入功能，并同时监视通信和其他硬件功能，5.在线提供测试“验证”信号，以方便和节省测试操作员的时间。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号