Evaluation of Characteristics of Electromagnetic Wave Absorbers of Composites Fabricated by Mechanical Milling

机译：机械研磨制造复合材料电磁波吸收剂特性评价

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

It is found through simulation that electromagnetic wave absorbers made of composites of Ni-Zn ferrite and SiO{sub}2 particles, which are isolated in a continuous medium of Ni-Zn ferrite, show absorption in the frequency regions both below and above 1 GHz. The measured complex permeabilities are close to simulation values above 1 GHz. Both absorbing bandwidth and center frequency of the composites are close to the desired values expected from the simulation result.

机译：通过仿真发现由Ni-Zn铁素体的复合材料制成的电磁波吸收剂，其在Ni-Zn铁氧体的连续介质中被隔离，显示出低于1GHz的频率区域中的吸收。测量的复杂渗透率接近于1 GHz以上的模拟值。复合材料的吸收带宽和中心频率均接近仿真结果预期的所需值。

著录项

来源
《Electronics Division Meeting of the Ceramic Society of Japan》|2005年||共4页
会议地点
作者
Kiyohiro Hiraki; Hiroki Kusunoki; Takatoshi Kondo; Kazushi Takada; Masahiro Nezaki; Shinzo Yoshikado;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TQ174-532;
关键词
Composite electromagnetic wave absorber; Isolated model; Ni-Zn ferrite; SiO{sub}2; Complex permeability; Mechanical milling method;

机译：复合电磁波吸收器;孤立的模型;Ni-Zn铁氧体;SiO {Sub} 2;复杂渗透率;机械铣削方法;

相似文献

外文文献
中文文献
专利

1. Evaluation of Characteristics of Electromagnetic Wave Absorbers of Composites Fabricated by Mechanical Milling [J] . Kiyohiro Hiraki, Hiroki Kusunoki, Takatoshi Kondo, Key Engineering Materials . 2006,第期

机译：机械研磨复合材料电磁波吸收特性的评估
2. Evaluation of Characteristics of Composite Electromagnetic Wave Absorbers [J] . Kenji Sakai, Kiyohiro Hiraki, Hiroki Kusunoki, Key Engineering Materials . 2006,第期

机译：复合电磁波吸收体特性评估
3. Grain-Size Dependence of Absorption Characteristics of the Electromagnetic Wave Absorbers of Ferrite-SiO{sub}2 Composites [J] . HIROKI KUSUNOKI, TAKATOSHI KONDO, KIYOHIRO HIRAKI, Electrical engineering in Japan . 2004,第4期

机译：铁氧体-SiO {sub} 2复合材料电磁波吸收体吸收特性的粒度依赖性
4. Evaluation of Characteristics of Electromagnetic Wave Absorbers of Composites Fabricated by Mechanical Milling [C] . Kiyohiro Hiraki, Hiroki Kusunoki, Takatoshi Kondo, Electronics Division Meeting of the Ceramic Society of Japan . 2005

机译：机械研磨制造复合材料电磁波吸收剂特性评价
5. Alternative methods to fabricate and evaluate copper zinc tin sulfide based absorber layers on transparent conducting electrodes. [D] . Sarswat, Prashant Kumar. 2012

机译：在透明导电电极上制造和评估基于铜锌锡硫化物的吸收层的替代方法。
6. Investigating the Microstructure and Mechanical Properties of Aluminum-Matrix Reinforced-Graphene Nanosheet Composites Fabricated by Mechanical Milling and Equal-Channel Angular Pressing [O] . Mahdi Hasanzadeh Azar, Bahareh Sadri, Alireza Nemati, 2019

机译：机械铣削和等通道角压制铝基增强石墨烯纳米片复合材料的微观结构和力学性能
7. Evaluation of Characteristics of Composite Electromagnetic Wave Absorbers [O] . Kenji Sakai, Kiyohiro Hiraki, Hiroki Kusunoki, 2015

机译：复合电磁波吸收器特性评估

Evaluation of Characteristics of Electromagnetic Wave Absorbers of Composites Fabricated by Mechanical Milling

摘要

著录项

相似文献

相关主题

期刊订阅