This paper introduces a modified an efficient design for different Class-E power amplifiers suitable to be use in biomedical implantable devices and in biomedical wireless telemetry devices which is usually have a small load resistor (several Ohms) due to its inductive powering. The different Class-E amplifiers operated according to the frequency chart for the medical implant communications service (MICS) 27 MHZ, and industrial scientific and medical (ISM) (13.56 MHZ), and low frequency 125-135 KHZ. The results show that the proposed class-E design could use the same values of C1, C2, L2 for small and optimum load resistor with high efficient more than 80% All these three class-E power amplifiers will be presents in this work and will be simulate with the MATLAB/SIMULINK environment, and for further verification all the circuits will be simulated with electronics workbench MULTISIM 9.
展开▼
机译:本文介绍了适用于生物医学可植入装置的不同类功率放大器的改进的高效设计,并且在生物医学无线遥测装置中,由于其感应供电,通常具有小负载电阻(几欧姆)。 根据医疗植入通信服务(MICS)27 MH Z SUB>和工业科学和医疗(ISM)的频率图操作的不同类别放大器(13.56 MH z sub >),低频125-135 kH z sub>。 结果表明,所提出的C类设计可以使用相同的C 1 sub>,c 2 sub>,l 2 sub>,用于小而最佳负载 电阻高效超过80%所有这三级-e功率放大器都将在这项工作中呈现出来,并将使用MATLAB / Simulink环境进行模拟,并且为了进一步验证,所有电路都将用电子工作台MultiSim 9模拟所有电路。
展开▼