首页> 外文会议>World foundry congress >EFFECTS OF MANGANESE CONTENT AND COOLING RATE ON FATIGUE IN LIMIT HEAVY SECTIONAL SPHEROIDAL GRAPHITE CAST IRON

【24h】

EFFECTS OF MANGANESE CONTENT AND COOLING RATE ON FATIGUE IN LIMIT HEAVY SECTIONAL SPHEROIDAL GRAPHITE CAST IRON

机译：锰含量和冷却速率对极限断面球墨铸铁中疲劳的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Axial load fatigue test was carried out using the spheroidal graphite cast iron which changed the Mn content and the cooling rate, following conclusions were obtained. (1) The cooling rate became slow in each Mn content, defect size of fracture origin was to become large, and the fatigue limit was decreasing In the case of same cooling rate, the fatigue limit was increased with increase of the Mn content.

机译：使用改变了Mn含量和冷却速度的球墨铸铁进行了轴向载荷疲劳试验，得出以下结论。（1）各Mn含量的冷却速度变慢，断裂起点的缺陷尺寸变大，疲劳极限降低。在相同冷却速度的情况下，疲劳极限随着Mn含量的增加而增加。

著录项

来源
《World foundry congress》|2018年|35-36|共2页
会议地点
作者
Naoto Shiraki; Tsubasa Hirose; Ryosuke Fujimoto;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类
关键词
Spheroidal graphite cast iron; Manganese; Cooling rate; Axial loading fatigue test; Fatigue limit; Defect size;

机译：球墨铸铁;锰;冷却速度轴向载荷疲劳试验;疲劳极限缺陷尺寸;

相似文献

外文文献
中文文献
专利

1. M−K模型中凹槽内、外应变速率差对Ti6Al4V合金高温成形极限曲线预测的影响 [J] . 李小强, 董红瑞, 王海波, 中国有色金属学报（英文版） . 2020,第002期
2. M-K模型中凹槽内、外应变速率差对Ti6Al4V合金高温成形极限曲线预测的影响 [J] . 李小强, 董红瑞, 王海波, 中国有色金属学报：英文版 . 2020,第002期
3. Effects of Number of Graphite Nodules on Fatigue Limit and Fracture Origins in Heavy Section Spheroidal Graphite Cast Iron [J] . Shiraki Naoto, Usui Yuki, Kanno Toshitake Materials transactions . 2016,第3期

机译：石墨结核数量对大截面球墨铸铁疲劳极限和断裂起源的影响
4. Relationship between Fatigue Limit and Defect Size in Spheroidal Graphite Cast Iron with Different Graphite Spheroidization Ratios and Microstructures [J] . Shiraki Naoto, Watanabe Takuya, Kanno Toshitake Materials transactions . 2015,第12期

机译：不同球化率和组织的球墨铸铁的疲劳极限与缺陷尺寸的关系
5. Effects of matrix structure and defect size on fatigue limit of heat-treated spheroidal graphite cast iron [J] . Hiroshi Tamura, Yoshihiro Sugiyama, Naoto Shiraki, 鋳造工学 . 2001,第9期

机译：基体结构和缺陷尺寸对热处理球墨铸铁疲劳极限的影响
6. EFFECTS OF MANGANESE CONTENT AND COOLING RATE ON FATIGUE IN LIMIT HEAVY SECTIONAL SPHEROIDAL GRAPHITE CAST IRON [C] . Naoto Shiraki, Tsubasa Hirose, Ryosuke Fujimoto World Foundry Congress . 2018

机译：锰含量和冷却速率对极限重截面球形石墨铸铁疲劳的影响
7. Development of high-modulus high-strength low-carbon spheroidal graphite cast irons. [D] . Fang, Long-Yinn. 1994

机译：开发高模量高强度低碳球墨铸铁。
8. Chunky Graphite in Low and High Silicon Spheroidal Graphite Cast Irons–Occurrence Control and Effect on Mechanical Properties [O] . Jon Sertucha, Garikoitz Artola, Urko de La Torre, 2020

机译：低和高硅球墨石墨石墨石墨石墨铸铁铸造控制和机械性能影响
9. Relationship between Fatigue Limit and Defect Size in Spheroidal Graphite Cast Iron with Different Graphite Spheroidization Ratios and Microstructures [O] . Naoto Shiraki, Takuya Watanabe, Toshitake Kanno 2015

机译：不同石墨铸铁的疲劳极限与缺陷尺寸的关系，不同石墨球形铸铁与微观结构

EFFECTS OF MANGANESE CONTENT AND COOLING RATE ON FATIGUE IN LIMIT HEAVY SECTIONAL SPHEROIDAL GRAPHITE CAST IRON

摘要

著录项

相似文献

相关主题

期刊订阅