As a neutron tube manufacturer, SODERN is now in charge of manufacturing tritium targets for accelerators, in cooperation with CEA/DAM/DTMN in Valduc. Specific deuterium and tritium targets are manufactured on request, according to the requirements of the users, starting from titanium target on copper substrate, and going to more sophisticated devices. A wide range of possible uses is covered, including thin targets for neutron calibration, thick targets with controlled loading of deuterium and tritium, rotating targets for higher lifetimes, or large size rotating targets for accelerators used in boron neutron therapy. Activity of targets lies in the 1 to 1000 Curie, diameter of targets being up to 30 cm. Special targets are also considered, including surface layer targets for lowering tritium desorption under irradiation, or those made from different kinds of occluders such as titanium, zirconium, erbium, scandium, with different substrates. It is then possible to optimise either neutron output, or lifetime and stability, or thermal behaviour.
展开▼
机译：作为中子管制造商，SODERN与Valduc的CEA / DAM / DTMN合作，负责制造加速器的targets靶。根据用户的要求，可以根据需要制造特定的氘和tri靶，从铜基板上的钛靶开始，然后用于更复杂的设备。涵盖了广泛的可能用途，包括用于中子校准的薄靶，可控制氘和loading负载的厚靶，用于更长寿命的旋转靶或用于硼中子治疗的加速器的大型旋转靶。目标的活动范围是1到1000居里，目标的直径可达30厘米。还考虑了特殊的靶材，包括用于降低irradiation在辐照下解吸的表层靶材，或由不同类型的封堵剂（如钛，锆，，with）制成的具有不同基材的靶材。然后有可能优化中子输出，寿命和稳定性或热性能。
展开▼
