• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>International conference on mechanical and electronics engineering >Effect of Solid Solution Under High Pressure on the Microstructures and Mechanical Properties of AM60B Alloy
【24h】

Effect of Solid Solution Under High Pressure on the Microstructures and Mechanical Properties of AM60B Alloy

机译：高压固溶对AM60B合金组织和力学性能的影响

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Effect of solid solution under high pressure on the microstructures and mechanical properties of AM60B alloy has been investigated. The results show that solid solution under high pressure leads to refined crystal grains of oc-Mg phase in the alloys after aging treatment. When the solid solution pressure is about 4GPa, the smallest grain size can be obtained, which is only 8.4% of the grain size when the solid solution is carried out under ambient pressure. Moreover, hardness and compressive strength of AM60B after aging treatment both increase remarkably when the" solid solution is performed under high pressure. The superior compressive strength and plasticity can be achieved at 5GPa.
机译：研究了高压下固溶对AM60B合金组织和力学性能的影响。结果表明，在时效处理后，高压下的固溶体导致合金中的oc-Mg相细化。当固溶压力为约4GPa时，可获得最小的晶粒尺寸，其仅为在环境压力下进行固溶时的晶粒尺寸的8.4％。而且，当在高压下进行固溶时，老化处理后的AM60B的硬度和抗压强度均显着增加。在5GPa下可获得优异的抗压强度和可塑性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号