• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>International Symposium on Friction Stir Welding >(Poster Session)Improvement of Bonding Strength between WC-12Co Cemented Carbide and Tool Steel by Friction Stir Processing
【24h】

(Poster Session)Improvement of Bonding Strength between WC-12Co Cemented Carbide and Tool Steel by Friction Stir Processing

机译：（海报会议）通过摩擦搅拌加工改善WC-12CO硬质合金和工具钢之间的粘合强度

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Friction stir processing (FSP) was carried out on a thermally sprayed WC-12Co layer. FSP successfully modified the WC-12Co layer and improved the bonding strength between the layer and the M2 tool steel substrate. FSP increased the hardness of the WC-12Co layer from 550-1200 HV to 1700-2000 HV. The hardness increase was mainly derived from the densification of the cemented carbide layer. FSP at a forging load of 14.7 kN significantly increased the bonding strength between WC-12Co and M2 tool steel. The FSP condition suppressed the growth of brittle η phase on the interface. Although FSP at a forging load of 19.6 kN densified throughout the layer, the improvement of the bonding strength was limited due to formation of η phase on the bonding interface.
机译：在热喷涂的WC-12CO层上进行摩擦搅拌处理（FSP）。 FSP成功修改了WC-12CO层，并改善了层和M2工具钢基板之间的粘接强度。 FSP从550-1200 HV到1700-2000 HV增加WC-12CO层的硬度。硬度增加主要来自粘合碳化物层的致密化。在锻造载荷为14.7kN的锻造载荷中的FSP显着提高了WC-12CO和M2工具钢之间的粘接强度。 FSP条件抑制了界面上脆性η相的生长。尽管在整个层中致密于19.6kN的锻造负载的FSP，但由于粘接界面上的η相的形成，键合强度的改善受限。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号