首页> 外文会议>Annual technical conference >The effect of LDPE-g-AA by a reactive extrusion process

【24h】

The effect of LDPE-g-AA by a reactive extrusion process

机译：一种反应挤出过程的LDPE-G-AA对LDPE-G-AA的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Acrylic Acid (AA) was grafted onto LDPE to modify its properties by reactive extrusion process. In this study, a co-rotating twin screw extruder and Banbury were mainly used for the reactive grafting process. By changing the configuration of the screw elements, different degrees of shearing effects gave various degree of grafting. It was found that the ratio of LDPE/AA/DHBP = 100/10/0.5 with a medium shearing in the extruder gave an optimal result, and the ratio of grafted AA was 4.7%, which was measured via a standard titration process.

机译：将丙烯酸（AA）接枝到LDPE上以通过反应挤出方法改变其性质。在这项研究中，主要用于反应性接枝过程的共旋转双螺杆挤出机和班伯里。通过改变螺钉元件的配置，不同程度的剪切效果得到了各种程度的接枝。发现LDPE / AA / DHBP = 100/10 / 0.5与挤出机中剪切的LDPE / AAA / DHBP = 100/10 / 0.5的比率得到了最佳结果，接枝AA的比例为4.7％，通过标准滴定法测量。

著录项

来源
《Annual technical conference》|2000年||共3页
会议地点
作者
J. F. Kuan; W. H. Lin; H. F. Shen; J. M. Huang;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类螺旋输送机;
关键词

相似文献

外文文献
中文文献
专利

1. Engineering analysis of the reactive extrusion of epsilon-caprolactone: The influence of processing on molecular degradation during reactive extrusion [J] . Kim BJ, White JL Journal of Applied Polymer Science . 2004,第3期

机译：ε-己内酯反应挤出的工程分析：反应挤出过程中加工对分子降解的影响
2. Engineering analysis of the reactive extrusion of epsilon-caprolactone: The influence of processing on molecular degradation during reactive extrusion [J] . Kim BJ, White JL Journal of Applied Polymer Science . 2004,第3期

机译：ε-己内酯反应挤出的工程分析：反应挤出过程中加工对分子降解的影响
3. Two Step Extrusion Process: From Thermal Recycling of PHB to Plasticized PLA by Reactive Extrusion Grafting of PHB Degradation Products onto PLA Chains [J] . Yang Xi, Clenet Jocelyn, Xu Huan, Macromolecules . 2015,第8期

机译：两步挤出工艺：从PHB的热循环到增塑的PLA（通过将PHB降解产物反应挤出接枝到PLA链上）
4. The effect of LDPE-g-AA by a reactive extrusion process [C] . J. F. Kuan, W. H. Lin, H. F. Shen, Annual technical conference . 2000

机译：一种反应挤出过程的LDPE-G-AA对LDPE-G-AA的影响
5. Novel processing methods based on the twin screw extrusion platform: Flowability control and reactive extrusion, development of hybrid methods with electrospinning and fabrication of graded nanobursa* meshes. [D] . Senturk-Ozer, Semra. 2012

机译：基于双螺杆挤出平台的新型加工方法：流动性控制和反应挤出，带静电纺丝的混合方法的开发以及梯度纳米囊*筛网的制造。
6. Development of Toughened Flax Fiber Reinforced Composites. Modification of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends by Reactive Extrusion Process [O] . Jacek Andrzejewski, Michał Nowakowski 2021

机译：强化亚麻纤维增强复合材料的研制。通过反应挤出法对聚（乳酸）/聚（丁烯己二酸丁二醇酯）共混物的改性
7. Preparation of Maleic Anhydride Grafted Poly(trimethylene terephthalate) (PTT-g-MA) by Reactive Extrusion Processing [O] . Natália F. Braga, Henrique M. Zaggo, Thaís L. A. Montanheiro, 2019

机译：反应加工制备马来酸酐接枝聚（三亚亚甲基对苯二甲酸酯）（PTT-G-MA）
8. Reactive Processing and Co-Extrusion of Ultra-High Temperature Ceramics and Composites [R] . Fahrenholtz, W. G. , Himas, G. E. , Chamberlain, A. L. , 2006

机译：超高温陶瓷和复合材料的反应加工和共挤出

The effect of LDPE-g-AA by a reactive extrusion process

摘要

著录项

相似文献

相关主题

期刊订阅