首页> 外文会议>International Congress on the Science and Technology of Ironmaking >ISOTHERM IN THE Fe-RICH REGION AND MgO PARTITIONING BETWEEN LIQUID SLAG AND Fe_3O_4 ON THE FeO_x-CaO-SiO_2-MgO SYSTEM AT 1573 K UNDER OXYGEN PARTIAL PRESSURE OF 10~(-7)atm
【24h】

ISOTHERM IN THE Fe-RICH REGION AND MgO PARTITIONING BETWEEN LIQUID SLAG AND Fe_3O_4 ON THE FeO_x-CaO-SiO_2-MgO SYSTEM AT 1573 K UNDER OXYGEN PARTIAL PRESSURE OF 10~(-7)atm

机译:在FEO_X-CAO-SIO_2-MGO系统的FEO_X-CAO-SIO_2-MGO系统中在FEO_X-CAO-SIO_2-MGO系统中的FE富渣区域和MgO分区中的ISotherm在10〜( - 7)ATM的氧气分压下

获取原文

摘要

The increment in the impurities of iron ore such as Al_2O_3 lowers the reducibility of iron ore sinter and increases the gas permeability resistance in a blast furnace. In order to overcome the problems, MgO is often added into sinter by blending dolomite and/or serpentine as a constituent of raw materials of sinters. The role of MgO in sinter at the lower part of a blast furnace depends on the MgO distribution in sinter. In this study, isotherm in the Fe-rich region and MgO partitioning between liquid slag and Fe_3O_4 on the FeO_x-CaO-SiO_2-MgO system have been measured at 1573 K and at oxygen partial pressures of 10~(-6) atm and 10~(-7) atm which are similar to that of the sintering process. It has been found that the liquid area in the FeO_x-rich side is decreased with addition of MgO over the measurement range of the CaO/SiO_2 ratios (mass%) between 0.32 and 2.28. The ratio of MgO concentrations in the liquid phase to that in the Fe_3O_4 phase decreases with increasing the CaO/SiO_2 ratio.
机译:铁矿石杂质中的增量降低了铁矿石烧结的可还原性,并增加了高炉中的透气性抗性。为了克服问题,MgO通常通过将白云石和/或蛇形作为索特尔原料的组成部分添加到烧结中。 MgO在高炉下部烧结中的作用取决于烧结中的MgO分布。在该研究中,在1573k和10〜(-6)atm和10的氧气部分压力下测量了Fe-arag和Fe_3O_4之间的Fe富渣和Fe_3O_4之间的Intherotm和MgO分区。 〜(-7)ATM类似于烧结过程的ATM。已经发现,在CaO / SiO_2比率(质量%)的测量范围内,在0.32和2.28之间的测量范围内,FeO_x的含量中的液体区域减小。随着CaO / SiO_2的比例的增加,液相中的MgO浓度与Fe_3O_4相中的比率降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号