首页> 外文会议>Asian BioCeramicSymposium >Flexural Strength Evaluation of Dental Post Prototype Contain ZAS-PMMA Composite Fiber with Electrospinning Methods
【24h】

Flexural Strength Evaluation of Dental Post Prototype Contain ZAS-PMMA Composite Fiber with Electrospinning Methods

机译:牙科柱原型的抗弯强度评估含有ZAS-PMMA复合纤维,具有静电纺丝方法

获取原文

摘要

Composite fibers have been developed and seem to be promising in dentistry. PMMA, optically clear polymer, was combined with higher mechanical properties ZrO2-Al2O3-SiO2 (ZAS) ceramic powder to improve the flexural strength value of dental post prototype. ZAS powders, with the ratio of 60:20:20, were first prepared via sol-gel technique. Afterward, PMMA was dissolved in acetone then incorporated with ZAS powder 1% wt to gain ZAS-PMMA composite fiber using electrospinning method. Dental posts prototype were fabricated into two groups, one group contained ZAS-PMMA composite fibers and another group contain neat BisGMA, as control, with an amount of each groups samples was 10. As-prepared samples were tested by Universal Testing Machine (UTM) to evaluate the flexural strength values. The result showed ZAS-PMMA composite fiber post and neat BisGma post had mean value 68,71 Mpa and 46,37 Mpa respectively. Based on unpaired T-test analysis (p-value < 0.05), the composite fiber post is significantly higher (48.17 %) than the neat BisGMA post. ZAS-PMMA composite fiber post was potential to be used as a dental endodontic post in anterior.
机译:已开发复合纤维,似乎在牙科有前途。 PMMA,光学透明的聚合物与较高的​​机械性能ZrO2-Al 2 O 3-SiO 2(ZAS)陶瓷粉末组合,以提高牙科柱原型的弯曲强度值。通过溶胶 - 凝胶技术首先制备ZAS粉末60:20:20的粉末。然后,将PMMA溶解在丙酮中,然后用ZAS粉末1%wt掺入使用静电纺丝法获得ZAS-PMMA复合纤维。牙科柱原型被制成两组,含有ZAS-PMMA复合纤维的一组含有纯细胞的ZAS-PMMA复合纤维,作为对照,每组样品的量为10.通过通用试验机(UTM)测试。通过通用试验机(UTM)进行制备的样品评估弯曲强度值。结果表明,ZAS-PMMA复合纤维柱和整齐的Bisgma柱分别具有平均值68,71MPa和46,37MPa。基于未配对的T检验分析(P值<0.05),复合纤维柱显着高于纯净的Bisgma柱。 ZAS-PMMA复合纤维柱潜力被用作前牙的牙齿牙髓柱。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号