LASER PROCESSING OF METAL SURFACES FOR INCREASING PAINT ADHESION

机译：用于增加油漆粘附的金属表面的激光加工

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Painted metal exteriors of buildings begin to degrade in about 10 years due to solar heat, ultraviolet rays, the sea salt adhesion, the acid rain etc. When degradation and exfoliation of the paint film occurs, rust appears in the metal and replacement or repainting becomes necessary. The adhesion of paints on metal is usually achieved by chemical adhesion or by increasing the surface area by blast processing. In this study, the possibility of improving paint adhesion by forming mime holes on the metal surface by laser irradiation was studied through modeling of the adhesion of the paint film and adaptability to deformation. The viscosity and painting method depend on the size and location of the holes. The presence of the holes makes it possible to form complicated shapes by pressing because the holes absorb some of the strain caused by pressing.

机译：由于太阳能热，紫外线，海盐粘附，酸雨等，涂料薄膜发生的紫外线射出，酸雨等，涂漆金属外墙在大约10年内开始降解。出现涂料薄膜的劣化和剥离，锈蚀，更换或重新绘制或重新绘制必要的。涂料对金属上的粘附通常通过化学粘附或通过喷射加工增加表面积来实现。在该研究中，通过模拟涂料膜的粘合和变形的适应性来研究通过激光照射在金属表面上形成金属表面上的哑铃孔来改善油漆粘附的可能性。粘度和涂漆方法取决于孔的尺寸和位置。孔的存在使得可以通过压制形成复杂的形状，因为孔吸收由压制引起的一些菌株。

著录项

来源
《High-Power Lasers in Civil Engineering and Architecture Conference》|2000年||共10页
会议地点
作者
T.Hirose; H.Ichihara; K.Sugimoto;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TN24-532;
关键词
paint; laser; adhesion;

机译：涂料;激光;粘附;

相似文献

外文文献
中文文献
专利

1. Laser Scale Pretreatment Solutions - Laser cutting on metals results in oxide scale. When this scale is painted over, adhesions failures can result. To resolve this, laser-cut metals should be acid pickles to help ensure a properly coated part [J] . GARY C. NELSON Industrial Paint & Powder . 2006,第1期

机译：激光氧化皮预处理解决方案-对金属进行激光切割会产生氧化皮。涂完此比例尺后，可能会导致粘合失败。为了解决这个问题，激光切割的金属应该是酸洗的，以帮助确保零件的正确涂层
2. Coating deposition and adhesion enhancements by laser surface texturing-metallic particles on different classes of substrates in cold spraying process [J] . Kromer R., Danlos Y., Aubignat E., Materials and Manufacturing Processes . 2017,第13a16期

机译：通过激光表面纹理 - 金属颗粒在冷喷涂过程中不同类基板上的激光表面纹理 - 金属颗粒进行涂层沉积和粘合性
3. A widely applicable method to fabricate underwater superoleophobic surfaces with low oil-adhesion on different metals by a femtosecond laser [J] . Jingzhou Zhang, Feng Chen, Qing Yang, Applied Physics . 2017,第9期

机译：飞秒激光在不同金属上具有低油粘附性的水下超疏油表面的广泛适用方法
4. LASER PROCESSING OF METAL SURFACES FOR INCREASING PAINT ADHESION [C] . T.Hirose, H.Ichihara, K.Sugimoto High-Power Lasers in Civil Engineering and Architecture Conference . 2000

机译：用于增加油漆粘附的金属表面的激光加工
5. Effect of Process Parameters on Surface Roughness and Porosity of Direct Metal Laser Sintered Metals [D] . Patibandla, Aditya Ramamurthy. 2018

机译：工艺参数对直接金属激光烧结金属表面粗糙度和孔隙率的影响
6. The Influence of Laser Surface Remelting on the Tribological Behavior of the ECAP-Processed AZ61 Mg Alloy and AZ61–Al2O3 Metal Matrix Composite [O] . Beáta Ballóková, Ladislav Falat, Viktor Puchý, 2020

机译：激光表面重熔对ECAP处理的AZ61镁合金和AZ61-Al2O3金属基复合材料的摩擦学性能的影响
7. Change of Ruffness of Surfaces and Adhesive force of Paint on Light Metal by Phosphoric acid Process. [O] . Hiroshi ASADA 1953

机译：磷酸工艺涂料涂料粗糙度和粘性力的变化。
8. Measurement of Adhesion Properties Between Topcoat Paint and Metallized/Galvanized Steel with Surface Energy Measurement Equipment [R] . Yang, S C, Lee, K W, Mirville, M, 2013

机译：用表面能测量设备测量面漆和金属化/镀锌钢的粘附性能

LASER PROCESSING OF METAL SURFACES FOR INCREASING PAINT ADHESION

摘要

著录项

相似文献

相关主题

期刊订阅