Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold-Rolled TRIP Steel

机译：连续退火过程对C-MN-Si轴承冷轧钢钢组织及性能的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Effects of continuous annealing process on microstructure and properties of Si based cold-rolled TRIP Steel were studied. The results show that the TRIP effect is more obvious on the condition of 800°C with 120 s annealing process and 400°C with 520 s aging treatment than others progress. The yield strength of the tested steel is 405 MPa, tensile strength is 670 MPa, elongation is 32% and strain hardening exponent is 0.230. The microstructures are ferrite, bainite and retained austenite and the volume fraction of retained austenite for the tested steel is 9.20%.

机译：研究了连续退火过程对基于Si的冷轧钢钢微观结构和性能的影响。结果表明，在800°C的情况下，跳闸效果具有120℃的120℃和400°C的衰老处理比其他进展超过520°C的进展。测试钢的屈服强度为405MPa，拉伸强度为670MPa，伸长率为32％，菌株硬化指数为0.230。微观结构是铁素体，贝氏体和保留奥氏体以及用于测试钢的保留奥氏体的体积分数为9.20％。

著录项

来源
《International Conference on Materials and Products Manufacturing Technology》|2013年||共6页
会议地点
作者
Lihui Wang; Di Tang; Haitao Jiang; Jibin Liu; Yu Chen;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TB3-532;
关键词
TRIP Steel; Annealing process; Retained austenite; Microstructure; Property;

机译：跳钢;退火过程;保留奥氏体;微观结构;财产;

相似文献

外文文献
中文文献
专利

1. Evolution of microstructure and mechanical properties of cold-rolled SUS430 stainless steel during a continuous annealing process [J] . Xiong Zhang, Zhi Wen, Ruifeng Dou, Materials Science and Engineering . 2014,第mara26期

机译：SUS430冷轧连续退火过程中组织和力学性能的演变
2. Effects of intercritical annealing process on microstructures and tensile properties of cold-rolled 7Mn steel [J] . Feng Yang, Haiwen Luo, Chundong Hu, Materials Science and Engineering . 2017,第FEBa8期

机译：临界退火工艺对冷轧7Mn钢组织和拉伸性能的影响
3. Effects of pre-annealing conditions on the microstructure and properties of vanadium-bearing dual-phase steels produced using continuous galvanizing line simulations [J] . Gong Y., Uusitalo J., Hua M., Journal of Materials Science . 2019,第9期

机译：使用连续镀锌线模拟生产预退火条件对含钒含钒双相钢的微观结构和性能
4. Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold-Rolled TRIP Steel [C] . Lihui Wang, Di Tang, Haitao Jiang, International Conference on Materials and Products Manufacturing Technology . 2013

机译：连续退火过程对C-MN-Si轴承冷轧钢钢组织及性能的影响
5. The mechanical properties and microstructures of vanadium bearing high strength dual phase steels processed with continuous galvanizing line simulations. [D] . Gong, Yu. 2015

机译：通过连续镀锌线模拟处理的含钒高强度双相钢的力学性能和显微组织。
6. Microstructure and Mechanical Properties of Hot- Rolled and Cold-Rolled Medium-Mn TRIP Steels [O] . Chunquan Liu, Qichun Peng, Zhengliang Xue, 2018

机译：热轧和冷轧中锰TRIP钢的组织和力学性能
7. EFFECT OF INITIAL PROCESSING ON THE MICROSTRUCTURE- PROPERTY RELATIONSHIPS IN BAKE-HARDENED C-Mn-Si TRIP STEELS [O] . I. B. Timokhina, E. V. Pereloma, P. D. Hodgson 2016

机译：初始加工对焙烧硬化C-mn-si TRIp钢微观组织 - 性能关系的影响
8. Effects of Friction Stir Processing on the Microstructure and Mechanical Properties of Fusion Welded 304L Stainless Steel [R] . Sterling, C. J., Nelson, T. W., Sorensen, C. D., 2004

机译：搅拌摩擦加工对304L不锈钢熔接组织和力学性能的影响

Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold-Rolled TRIP Steel

摘要

著录项

相似文献

相关主题

期刊订阅