• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文会议>Global Conference on Sustainable Manufacturing >Single Roll Melt Spinning Technique Applied as a Sustainable Forming Process to Produce Very Thin Ribbons of 5052 and 5083 Al-Mg Alloys Directly from Liquid State
【24h】

Single Roll Melt Spinning Technique Applied as a Sustainable Forming Process to Produce Very Thin Ribbons of 5052 and 5083 Al-Mg Alloys Directly from Liquid State

机译：单辊熔融纺丝技术作为可持续的成型过程，直接从液态产生5052和5083型铝合金的非常薄的丝带

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In this paper, single roll melt spinning technique is used as a sustainable manufacturing process to reduce waste, time, energy, and cost. The nonconventional forming machine is manufacturing to produce very thin ribbon of 5052 and 5083 Al-Mg alloys in the range of micrometer. It is a tool for modifying the microstructure of alloy and improved their properties. The process has a direct impact for saving materials, machine, method, men, and money (5M) compared with conventional forming technology due to their ability to produce very thin ribbons directly from liquid state. The properties of the produced ribbons were investigated and the result indicating that there is a possibility to produce ribbons with micro thickness of 20 to 330 μm and width of 0.97 to 7.4 mm. Moreover, the hardness was improved to be more than twice of the original hardness of alloy. The corrosion resistance of alloy was improved and their rate was reduced.
机译：在本文中，单辊熔融纺丝技术用作可持续的制造过程，以减少浪费，时间，能量和成本。非转化成型机正在制造，以在千分尺范围内生产的5052和5083 Al-Mg合金的非常薄的带。它是一种改变合金微观结构并改善其性质的工具。由于能够直接从液态生产非常薄的色带，因此该过程对节省材料，机器，方法，男性和金钱（5M）具有直接的影响，与传统的成型技术相比。研究了所生产的丝带的性质，结果表明存在具有20至330μm的微厚度和0.97至7.4mm的微厚厚度的带的有可能产生带的带。此外，硬度改善为原始合金原始硬度的两倍多。合金的耐腐蚀性得到改善，其速率降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号