首页> 外文会议>International Conference on Tribology >Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating

【24h】

Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating

机译：使用Ti / TiN / TiCN / NC-TiCN制成的注塑模具的耐磨性增加：A-C / NC-TIC：A-C / A-C纳米复合涂层

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Injection molds used in production of plastic components are subject of heavy abrasion wear. The increase of their wear resistance significantly reduces the production cost. In the current work are presented research results of the wear resistance of injection molds made of steel 1.2343, coated with Ti/TiN/TiCN/nc-TiCN: a-C/nc-TiC:a -C/a-C. The study of the wear rate was done using the volumetric method and the influence of the trace length was investigated. The coating thickness, nanohardness, elastic modulus and adhesion were also tested. The coating was applied on unhardened ground specimens, hardened ground specimens and hardened polished specimens.

机译：用于生产塑料部件的注射模具是重型磨损的受试者。它们的耐磨性的增加显着降低了生产成本。在目前的工作中，提出了由钢1.2343制成的注塑模具的耐磨性的研究结果，涂有Ti / TiN / TiCN / NC-TICN：A-C / NC-TIC：A-C / A-C.使用体积方法进行磨损率的研究，研究了痕量长度的影响。还测试了涂层厚度，纳米型，弹性模量和粘附性。将涂层应用于未加工的地面标本，硬化地样本和硬化抛光标本。

著录项

来源
《International Conference on Tribology》|2017年|543 p.|共8页
会议地点
作者
Velko Rupetsov; Georgi Mishev; Stefan Dishliev;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类工程材料学;
关键词

相似文献

外文文献
中文文献
专利

1. Microstructure, mechanical and tribological properties of the nc-Cr _xC _y/a-C and nc-Cr _xC _y/a-C:H nanocomposite coatings on oxygen-hardened Ti-6Al-4V alloy (Conference Paper [J] . Zimowski S., Moskalewicz T., Kot M., Surface and Interface Analysis: SIA: An International Journal Devoted to the Development and Application of Techniques for the Analysis of Surfaces, Interfaces and Thin Films . 2012,第8期

机译：氧硬化Ti-6Al-4V合金上nc-Cr _xC _y / a-C和nc-Cr _xC y / a-C：H纳米复合涂层的组织，力学和摩擦学性能（会议论文）
2. Investigation of Toughness and Wear Resistance of a-C/a-C:Cr Multilayer Coatings [J] . K.J. Ma, H.H. Chien, C.L. Chao Key Engineering Materials . 2007,第期

机译：a-C / a-C：Cr多层涂层的韧性和耐磨性研究
3. Preparation of a-C:H/a-C:H:Si:O and a-C:H/a-C:H:Si multilayer coatings by PACVD [J] . Bewilogua K., Bialuch I., Ruske H., Surface & Coatings Technology . 2011,第4期

机译：通过PACVD制备a-C：H / a-C：H：Si：O和a-C：H / a-C：H：Si多层涂层
4. Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating [C] . Velko Rupetsov, Georgi Mishev, Stefan Dishliev International Conference on Tribology . 2017

机译：使用Ti / TiN / TiCN / NC-TiCN制成的注塑模具的耐磨性增加：A-C / NC-TIC：A-C / A-C纳米复合涂层
5. The impact of coating architecture on the hardness, friction and wear resistance of hard and tribological nanocomposite coatings. [D] . Endrino, Jose Luis. 2003

机译：涂层结构对硬和摩擦纳米复合涂层的硬度，摩擦和耐磨性的影响。
6. Long-term aging of Ag/a-C:H:O nanocomposite coatings in air and in aqueous environment [O] . Martin Drábik, Josef Pešička, Hynek Biederman, 2015

机译：Ag / a-C：H：O纳米复合涂层在空气和水性环境中的长期老化
7. On the composition analysis of nc-TiC/a-C: H nanocomposite coatings [O] . N G Chechenin, P N Chernykh, V S Kulikauskas, 2008

机译：nc-TiC / a-C：H纳米复合涂层的成分分析
8. Biocompatible Silver-Containing a-C:H and a-C Coatings: A Comparative Study [R] . Endrino, J. L. , Allen, M. , Escobar-Galindo, R. , 2007

机译：生物相容性含银a-C：H和a-C涂层：对比研究

Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating

摘要

著录项

相似文献

相关主题

期刊订阅