Numerical Analysis of Annealing Process with Local Inductive Heating on A286 Alloy Tube

机译：A286合金管局部电感加热的退火过程数值分析

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Based on the local annealing process with induction heating for the A286 alloy sleeve of the blind bolt, a mathematical model is built to analyze electromagnetic-thermal coupling. Influence factors, such as frequency and current, are investigated and analyzed using finite element method on temperature distribution and length of the annealing zone in induction heating. The experiment on local annealing of the sleeve is then carried out with the optimal parameters of annealing process. Results show that temperature distribution designed in annealing zone is in a good agreement with the hardness distribution of the sleeve. The local annealing process validated by wrinkle of the sleeve under axial compression is feasible.

机译：基于盲螺栓A286合金套筒的局部退火过程，建立了一种数学模型来分析电磁热耦合。利用有限元法研究和分析了频率和电流的影响因素，并在感应加热中的退火区的温度分布和长度的温度分布和长度。然后通过退火过程的最佳参数进行套筒局部退火的实验。结果表明，在退火区中设计的温度分布与套筒的硬度分布一致。通过轴压压缩下套筒皱纹验证的本地退火过程是可行的。

著录项

来源
《International Conference on Manufacturing Engineering and Intelligent Materials》|2017年|680p|共8页
会议地点
作者
Zhi-guo Feng; Yang Li; Xiong-feng Liu;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TB3-53;
关键词
Blind bolt; A286 Alloy; Induction Heating; Thin-walled; Local Annealing;

机译：盲螺栓;A286合金;感应加热;薄壁;局部退火;

相似文献

外文文献
中文文献
专利

1. Thermo-mechanically coupled FE analysis and sensitivity study of simultaneous hot/cold forging process with local inductive heating and cooling [J] . Anton Matzenmiller, Christoph Bröcker International Journal of Material Forming . 2012,第4期

机译：局部感应加热和冷却同时热/冷锻过程的热力耦合有限元分析和敏感性研究
2. Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating [J] . Lee Eun-Ho, Yang Dong-Yol, Yoon Jeong Whan, International Journal of Solids and Structures . 2015,第Null期

机译：红外局部加热双相980钢成形过程的数值模拟与分析
3. Numerical analysis of chip formation and shear localisation processes in machining the Ti-6Al-4V titanium alloy [J] . M. Calamaz, D. Coupard, M. Nouari, The International Journal of Advanced Manufacturing Technology . 2011,第9a12期

机译：Ti-6Al-4V钛合金加工中切屑形成和剪切局部化过程的数值分析
4. Numerical Analysis of Annealing Process with Local Inductive Heating on A286 Alloy Tube [C] . Zhi-guo Feng, Yang Li, Xiong-feng Liu International Conference on Manufacturing Engineering and Intelligent Materials . 2017

机译：A286合金管局部电感加热的退火过程数值分析
5. THE EXPERIMENTAL DETERMINATION OF THE LOCAL AND AVERAGE HEAT TRANSFER CHARACTERISTICS AND AVERAGE FRICTION COEFFICIENTS FOR TURBULENT FLOW OF AIR AND ARGON WITH VARIABLE PROPERTIES IN SMOOTH TUBES WITH THE BOUNDARY CONDITIONS OF CONSTANT WALL TEMPERATURE HEATING AND INCREASING HEAT FLUX HEATING. [D] . PRIDEAUX, JEAN PAUL. 1966

机译：具有恒定壁温加热和增加热通量边界条件的光滑管中具有可变特性的空气和氩气湍流的局部和平均传热特性的试验摩擦系数和平均摩擦系数。
6. Magnetically driven three-dimensional manipulation and inductive heating of magnetic-dispersion containing metal alloys [O] . Joshua D. Calabro, Xu Huang, Brian G. Lewis, 2010

机译：含磁性金属分散体的磁驱动三维操纵和感应加热
7. Retraction Note: Numerical and experimental analyses of repetitive tube expansion and shrinking processed AZ91 magnesium alloy tubes [O] . H. Jafarzadeh, K. Abrinia 2015

机译：收缩注意：重复管膨胀和收缩加工AZ91镁合金管的数值和实验分析
8. Numerical prediction of local transitional features of turbulent forced gas flows in circular tubes with strong heating [R] . Ezato, K. , Kunugi, T. , Shehata, A. M. , 1997

机译：强加热圆管内湍流强制气流局部过渡特性的数值预测

Numerical Analysis of Annealing Process with Local Inductive Heating on A286 Alloy Tube

摘要

著录项

相似文献

相关主题

期刊订阅