首页> 外文会议>Advances in Composite Science and Technology >Influence of refractory nanosized particles of tungsten carbide and titanium on the structure and properties of the weld metal

【24h】

Influence of refractory nanosized particles of tungsten carbide and titanium on the structure and properties of the weld metal

机译：碳化钨耐火纳米粒子颗粒对焊接金属结构及性能的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The paper considers the influence of nanosized particles of tungsten and titanium carbides on the structure and properties of the weld metal of welded joints made by automatic submerged-arc automatic arc welding.To add them into the weld pool,an alloying composition was used in the form of composite granules based on nickel powder(PNE-1 as per GOST 9722).The prospects of using nanosized tungsten carbide particles for modifying the weld metal with the aim to increase the values of impact strength were shown.However,titanium carbide in the same conditions leads to a decrease in the average value of impact strength,despite the modifying effect of its use.

机译：本文考虑碳化钨颗粒和碳化钛颗粒对自动浸没式电弧自动弧焊制造的焊接接头焊接金属的结构和性能。将它们加入焊接池中，使用合金化组合物基于镍粉的复合颗粒的形式（根据GOST 9722）。显示使用纳米氧化钨颗粒来改变焊接金属的前景，以增加冲击强度的目标。但是，碳化钛尽管其使用的效果，但相同的条件导致影响力的平均值降低。

著录项

来源
《Advances in Composite Science and Technology》|2020年|596 p.|共7页
会议地点
作者
A S Pankratov; N V Kobernik; A V Samokhin;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类工程材料学;
关键词

相似文献

外文文献
中文文献
专利

1. Influence of Tungsten Carbide and Titanium Carbide Nanoparticles on the Structure and Properties of the Weld Metal [J] . N. P. Aleshin, V. V. Brovko, N. V. Kobernik, Russian Metallurgy(Metally) . 2018,第9期

机译：碳化钨和碳化钛纳米粒子对焊缝金属结构及性能的影响
2. Modification of Weld Metal with Tungsten Carbide and Titanium Nitride Nanoparticles in Twin Submerged Arc Welding (vol 52, pg 440, 2018) [J] . Aleshin N. P., Grigorev M. V., Kobernik N. V., High Energy Chemistry . 2019,第2期

机译：用钨碳化物和氮化钛纳米粒子的焊接金属改性在双浸弧焊（Vol 52，PG 440,2018）
3. Modification of Weld Metal with Tungsten Carbide and Titanium Nitride Nanoparticles in Twin Submerged Arc Welding [J] . N. P. Aleshin, M. V. Grigor’ev, N. V. Kobernik, High Energy Chemistry . 2018,第5期

机译：用钨碳化物和氮化钛纳米粒子在双浸弧焊焊接金属改造
4. Influence of refractory nanosized particles of tungsten carbide and titanium on the structure and properties of the weld metal [C] . A S Pankratov, N V Kobernik, A V Samokhin Advances in Composite Science and Technology . 2020

机译：碳化钨耐火纳米粒子颗粒对焊接金属结构及性能的影响
5. The microstructures and mechanical properties of powder metallurgy (PM) titanium-48aluminum-2chromium-2niobium-(0-1)tungsten [D] . Bulmer, Scott W. 2008

机译：粉末冶金（PM）钛-48铝-2铬-2铌-（0-1）钨的显微组织和力学性能
6. Microstructure Corrosion and Mechanical Properties of TiC Particles/Al-5Mg Composite Fillers for Tungsten Arc Welding of 5083 Aluminum Alloy [O] . Qibo Huang, Rouyue He, Chunxia Wang, 2019

机译：用于5083铝合金钨极电弧焊的TiC颗粒/ Al-5Mg复合填充材料的组织腐蚀和力学性能
7. Microstructure and Abrasive Wear Resistance of Metal Matrix Composite Coatings Deposited on Steel Grade AISI 4715 by Powder Plasma Transferred Arc Welding Part 1. Mechanical and Structural Properties of a Cobalt-Based Alloy Surface Layer Reinforced with Particles of Titanium Carbide and Synthetic Metal–Diamond Composite [O] . Artur Czupryński 2021

机译：粉末等离子体转移弧焊件沉积在钢级AISI 4715上的金属基质复合涂层的微观结构和磨料耐磨部1.用碳化钛颗粒加固的钴基合金表面层的机械和结构性能及合成金属 - 金刚石复合材料

Influence of refractory nanosized particles of tungsten carbide and titanium on the structure and properties of the weld metal

摘要

著录项

相似文献

相关主题

期刊订阅