首页> 外文会议>Sensors, systems, and next-generation satellites XIV >Onboard spectral calibration for the Japanese Hyper-spectral sensor
【24h】

Onboard spectral calibration for the Japanese Hyper-spectral sensor

机译:日本高光谱传感器的车载光谱校准

获取原文
获取原文并翻译 | 示例

摘要

The Japanese hyper-spectral sensor provides data products covering continuous spectral bands in the wavelength range from 400 nm to 2500 nm. It is characterized by a SNR of > 450 in the VNIR and>300 in the SWIR range at a ground resolution of 30 m x30 m. This report is concerned with the onboard wavelength calibration methods for the Japanese hyper-spectral sensor. As a result of trade study, the combination of a transmission type glass filter containing rare earth oxides, a Mylar polyester film and a quartz tungsten-halogen-lamp was selected. This method covers the wavelength range from 400 nm to 2450 nm. For the purpose of wavelength shift estimation, the method employing the mean square deviation as merit-function was found to be stable and precise. The accuracy of the absorption peak wavelength determination will be expected less than 2% (=0.2 nm) for the VNIR spectral resolution and 5% (=0.625 nm) for the SWIR spectral resolution.
机译:日本的高光谱传感器提供的数据产品覆盖了从400 nm到2500 nm波长范围内的连续光谱带。它的特点是在30 m x30 m的地面分辨率下,VNIR的SNR> 450,SWIR的SNR> 300。该报告与日本高光谱传感器的车载波长校准方法有关。贸易研究的结果,选择了包含稀土氧化物的透射型玻璃滤光片,聚酯薄膜和聚酯钨薄膜以及卤素钨灯石英灯的组合。该方法覆盖从400nm到2450nm的波长范围。为了进行波长偏移估计,发现采用均方差作为优点函数的方法是稳定且精确的。对于VNIR光谱分辨率,预计吸收峰波长确定的精度将小于2%(= 0.2 nm),对于SWIR光谱分辨率,其精度将小于5%(= 0.625 nm)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号