首页> 中文期刊> 《现代技术陶瓷》 >Ag/AgCl/ZnO纳米复合材料的制备及其光催化性能

Ag/AgCl/ZnO纳米复合材料的制备及其光催化性能

         

摘要

A series of the Ag/AgCl/ZnO nano-composites with different Ag contents were synthesized by combining co-precipitation with calcinations method using Zn(NO3)2·6H2O, AgNO3,Na2CO3as reactants. The as-prepared samples were well-characterized by XRD, SEM, TEM, DRS and UV-Vis. The results showed that the intrinsic absorded spectrum edge of ZnO was extended from 390 nm to 700 nm after being modified by adding Ag/AgCl. The photocatalytic performance of composite photocatalyst Ag/AgCl/ZnO were studied using an ultraviolet lamp as illumination device and Rhodamine B (RhB) as stimulant pollutant. It was found that Ag loading content of 11.92 wt% is the optimal dosage to achieve the highest photodegradation rate. The rate of degradation of the as-prepared Ag/AgCl/ZnO is nearly 2.5 times faster than that of bare ZnO due to high concentration of Ag/AgCl-ZnO interface, then Ag deposit acted as electron sinks to enhance the separation of photoexcited electrons from holes. Finally, a possible photocatalytic mechanism was proposed.%以硝酸锌、硝酸银和碳酸钠为原料,通过沉淀法结合热分解法制备了一系列不同银含量的Ag/AgCl/ZnO纳米复合材料,并对其物相组成、微观结构、光学性质以及光催化性能进行了表征.结果表明:Ag/AgCl复合后可以是ZnO的本征吸收从390 nm左右延伸至700 nm左右,拓宽了ZnO的光谱吸收范围;Ag质量分数为11.92 wt% 时,Ag/AgCl物相在材料内部的分布更细密,Ag/AgCl与ZnO形成较大面积的接触界面,此时复合光催化剂降解罗丹明B溶液效率最佳.本文还初步探讨了Ag/AgCl物相引入后对ZnO 光催化活性的影响机理.

著录项

  • 来源
    《现代技术陶瓷》 |2018年第1期|40-50|共11页
  • 作者单位

    江西科技师范大学材料与机电学院,南昌330038;

    江西省材料表面工程重点实验室,南昌330038;

    中国科学院上海硅酸盐研究所 无机材料分析测试中心,上海200050;

    江西科技师范大学材料与机电学院,南昌330038;

    江西科技师范大学材料与机电学院,南昌330038;

    江西科技师范大学材料与机电学院,南昌330038;

    江西科技师范大学材料与机电学院,南昌330038;

    江西科技师范大学材料与机电学院,南昌330038;

    江西科技师范大学材料与机电学院,南昌330038;

    江西省材料表面工程重点实验室,南昌330038;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 特种结构材料;
  • 关键词

    Ag/AgCl/ZnO; 光催化活性; 罗丹明B;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号