首页> 中文期刊> 《鞍钢技术》 >RH精炼过程深脱硫技术研究

RH精炼过程深脱硫技术研究

         

摘要

Deep desulphurization tests were carried out in 180 t RH by using CaO-Al2O3-SiO2-based desulphurizer with low content of SiO2. The test results show that the desulphurization rate can be over 70% and the resulphurization phenomenon did not occur. The increase of content of FeO and MnO in slag in RH desulphurization process is helpful to the increase of the optical basicity of slag and the suitable addition amount of desulphurizer is 1.5 tons.%采用低SiO2含量的CaO-Al2O3-SiO2系脱硫剂,在180 t RH上进行了深脱硫试验。结果表明,脱硫率可达到70%以上,且处理过程中未发生回硫现象;RH脱硫过程炉渣中FeO和MnO含量的升高有利于炉渣光学碱度的提高;脱硫剂的合适加入量为1.5 t。

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号