Dry stock of silica sol ceramic mould was prepared by using of colloidal moulding technique with an optimized vacuum drying process.Effect of roasting process on the shrinkage rate and compressive strength of zircon-silica sol ceramic mould,and the relationship between the roasting temperature and microstructure of zircon-silica sol ceramic mould were studied.The optimum roasting temperature of zircon-silica sol ceramic mould gained by the experiments is 900℃ and the holding time is 2 h.The scanning electron microscope(SEM) observation showed the growth of refractory particles during the roasting process.The occurrence of sintering was observed in the zircon-silica sol ceramic mould when roasting temperature was above 1,000℃.
展开▼
机译：Study on Risk Management of Epidemic Prevention in High Rise Residential Areas of Urban Community from the Perspective of COVlD-19: A Case Study of L Community in Handan City
机译：Qualitative and Comparative Study of Different Methods of Interpolation for the Mapping of Groundwater Salinity: Case Study of Thermal Waters Used for Irrigation in Northeastern Algeria
机译：如何发展银行品牌形象-以专注于财富管理业务的远东国际商业银行为例 =The Study of the Development of Bank’s Brand Image- A Case Study of Far Eastern Int’l Bank Targeting on Wealth Management
