首页> 中文期刊> 《材料工程》 >热等静压对第二代单晶高温合金DD6显微组织和力学性能的影响

热等静压对第二代单晶高温合金DD6显微组织和力学性能的影响

         

摘要

Effects of the hot‐isostatic pressing (HIP) temperature (1280 ,1300 ,1320℃) on microstruc‐tures and mechanical properties of a second generation single crystal superalloy DD 6 were investiga‐ted .T he results show that the HIP treatment significantly decrease the cast porosity number of DD 6 compared with standard treated specimens .Especially ,the cast porosity volume fraction is deceased from 0 .31% to 0 .04% after the HIP treatment of 1300℃/100MPa ,4h .The cast eutectic volume fractions are remarkably reduced with increasing HIP temperature .The HIP treatments nearly un‐changed the creep lives ,While they greatly promote the low cycle fatigue lives .The elimination of cast microspores using the HIP treatment of 1300℃/100M Pa ,4h result in the inhibition of crack initi‐ation during fatigue and improve the low cycle fatigue lives one order of magnitude larger than that af‐ter standard heat treatment .%通过1280,1300℃和1320℃3个温度的热等静压实验,对比分析热等静压对第二代单晶高温合金DD6显微组织和力学性能的影响。结果表明:热等静压能够显著减少显微疏松,尤其是经过1300℃/100M Pa ,4h热等静压处理的合金内部显微疏松含量从0.31%降低到0.04%。提高热等静压温度能显著减少共晶含量。热等静压对合金的持久性能没有明显影响,但能显著提高DD6单晶合金的低周疲劳性能。经过1300℃/100M Pa ,4h热等静压处理的合金疲劳寿命较经过标准热处理的疲劳寿命提高了一个数量级,这与热等静压显著减少合金中的疏松孔洞相关。

著录项

  • 来源
    《材料工程》 |2016年第10期|60-67|共8页
  • 作者单位

    北京航空材料研究院先进高温结构材料重点实验室;

    北京100095;

    北京科技大学材料科学与工程学院;

    北京100083;

    北京航空材料研究院先进高温结构材料重点实验室;

    北京100095;

    北京科技大学新金属材料国家重点实验室;

    北京100083;

    北京航空材料研究院先进高温结构材料重点实验室;

    北京100095;

    北京航空材料研究院先进高温结构材料重点实验室;

    北京100095;

    北京航空材料研究院先进高温结构材料重点实验室;

    北京100095;

    北京航空材料研究院先进高温结构材料重点实验室;

    北京100095;

    北京科技大学材料科学与工程学院;

    北京100083;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 高熔点合金、难熔合金、高温合金;
  • 关键词

    热等静压; 单晶高温合金; 显微疏松; 力学性能;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号