首页> 中文期刊> 《材料工程》 >Ti3AlC2循环氧化表面氧化膜的结构和结合强度

Ti3AlC2循环氧化表面氧化膜的结构和结合强度

         

摘要

采用扫描电镜和超声划痕法研究了Ti3AlC2在650~950℃范围抗循环氧化后的表面、截面形貌和膜基结合强度.结果表明:经历40次循环之后,Ti3AlC2在650℃存在反氧化现象;在750~950℃氧化动力学属于抛物线型,同时表面形成平坦、致密和无微裂纹的氧化膜,该氧化膜能够有效阻挡O的向内扩散以及Ti和Al的向外扩散,氧化膜和基体结合良好,并且出现分层现象,其结合强度均大于50mN.%The surface, section morphology and adhesive strength of anticyclic-oxidized Ti3AlC2 were analyzed by SEM and ultrasound scratch method at 650-950℃. The results show that after 40-cycle oxidation the abnormal oxidation occurs at 650℃. At 750-950℃ the oxidation kinetics follows a parabolic rate law and the flat, dense and microcrack-free oxide scales are formed which can effectively impedance the inner-diffusion of 0 and the outer-diffusion of Ti and Al,protect the substrate of Ti3 A1C2, well adhesive to the substrate and demixing, the adhesive strength is greater than 50mN.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号