首页> 中文期刊> 《机械工程材料》 >锰掺杂量对0.96K0.5Na0.5NbO3-0.04Bi0.5Na0.5ZrO3无铅压电陶瓷性能的影响

锰掺杂量对0.96K0.5Na0.5NbO3-0.04Bi0.5Na0.5ZrO3无铅压电陶瓷性能的影响

         

摘要

The 0.96K0.5Na0.5NbO3-0.04Bi0.5Na0.5ZrO3+xMnCO3(0.96KNN-0.04BNZ+xMn,x=0,0.1%, 0.3%,0.5%,0.7%,mass fraction)lead-free piezoelectric ceramics were prepared by conventional solid state reaction method.The effects of Mn doping amount on the crystal structure,microstructure,piezoelectric and dielectric properties of the lead-free piezoelectric ceramics were investigated.The results show that the 0.96KNN-0.04BNZ+xMn ceramics had a pure perovskite structure.With increasing x,the phase of the ceramics changed from the coexistence of orthorhombic and tetragonal phases to orthorhombic phase;the bulk density,piezoelectric constant,planar electromechanical coupling factor and dielectric constant first increased and then decreased;the mechanical quality factor increased;the dielectric loss angle tangent,remanent polarization,coercive field and Curie temperature decreased.The comprehensive performance of the ceramics was the best when x was equal to 0.3wt%.%采用传统固相烧结法制备0.96K0.5Na0.5NbO3-0.04Bi0.5Na0.5ZrO3+xMnCO3(简称为0.96KNN-0.04BNZ+xMn,x=0,0.1%,0.3%,0.5%,0.7%,质量分数)无铅压电陶瓷,研究了锰掺杂量对该无铅压电陶瓷晶相结构、显微结构、压电和介电性能的影响.结果表明:0.96 KNN-0.04BNZ+xMn陶瓷具有纯钙钛矿结构,随着x 的增加,陶瓷相从正交-四方两相共存转变为正交相,体积密度、压电常数、机电耦合系数和介电常数先增后降,机械品质因数增大,而介电损耗角正切、剩余极化强度、矫顽场和居里温度降低;当x 为0.3%时,陶瓷的综合性能最佳.

著录项

  • 来源
    《机械工程材料》 |2018年第4期|17-21|共5页
  • 作者单位

    景德镇陶瓷大学材料科学与工程学院,中国轻工业功能陶瓷材料重点实验室,江西省能量存储与转换陶瓷材料工程实验室,景德镇333403;

    景德镇陶瓷大学材料科学与工程学院,中国轻工业功能陶瓷材料重点实验室,江西省能量存储与转换陶瓷材料工程实验室,景德镇333403;

    景德镇陶瓷大学材料科学与工程学院,中国轻工业功能陶瓷材料重点实验室,江西省能量存储与转换陶瓷材料工程实验室,景德镇333403;

    景德镇陶瓷大学材料科学与工程学院,中国轻工业功能陶瓷材料重点实验室,江西省能量存储与转换陶瓷材料工程实验室,景德镇333403;

    景德镇陶瓷大学材料科学与工程学院,中国轻工业功能陶瓷材料重点实验室,江西省能量存储与转换陶瓷材料工程实验室,景德镇333403;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 腐蚀的控制与防护;
  • 关键词

    无铅压电陶瓷; 铌酸钾钠; 锆酸铋钠; 锰掺杂;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号