The surface of non-woven polypropylene secondary battery separator was modified by hollow cathode remote plasma polymerizatioa The polymerization mechanism was analyzed, and the effects of working parameters (such as discharge power, working gas flow rate, sample position etc. ) on the polymerization rate were studied systematically. The IR and SEM were used to analyze the chemical composition and the surface morphology. The results show that the hydrophilic group was imported on the surface of polypropylene after hollow cathode remote plasma modification, so that the wettability of the non-woven polypropylene secondary battery separator was greatly improved.%应用自制的空心阴极等离子体装置,引发丙烯酸在丙纶表面的接枝聚合,研究了等离子体接枝聚合作用机理,分析了等离子体接枝聚合各参数(放电功率、气体流量、丙烯酸蒸气流量、样品位置等)对聚合速率的影响.通过红外光谱、扫描电镜等对丙纶接枝聚合膜表面的化学组成和形态结构等进行了表征分析,证明了亲水基团的引入,改善了丙纶隔膜的亲水性能.
展开▼
