为实现遥码通信系统的国产化功能替换,提出一种基于逆向工程方法和嵌入式控制技术的新思路。通过对原遥码通信系统的组成、功能分析和反设计,运用逆向工程方法和嵌入式控制技术,实现了遥码通信系统的国产化。在专用测试台上,对国产化遥码通信系统与原遥码通信系统进行了性能对比测试。试验结果证明:国产化遥码通信系统能够满足武器装备的正常使用要求,已成功应用于工厂装备修理和部队装备的维护保障,减少了对装备引进方的依赖,有效缩短了装备维修周期,节约了维修成本。%In order to realize the localization function replacement of remote communication system, a new idea is proposed based on reverse engineering method and embedded control technology. The localization of remote communication system is achieved through composing and function analyzing to the original one, using reverse engineering method and embedded control technology. On the special test bed, the performance compare test between the localized system and the original one is carried out. The tryout result indicates that the localized system can meet the application requirement of the imported weapon equipment, and it has been used in a factory and in the army to guarantee equipment maintenance and support. The reliance on the exporter is reduced, the maintenance cycle of the equipment is shortened effectively, and maintenance cost is saved, too.
展开▼