1台体积为50m3低压搪瓷泄料槽筒体和封头连接部位,由于搪瓷化过程产生非自由热变形区,对其应力状况进行了分析测试。经实测和理论分析证明,其应力水平在设计压力下仍处于弹性范围。经反复高温搪瓷材质性能无明显变化,少量几何变形对应力水平影响不大,仍能合于使用。%The stresses at the non-free thermal deformation zone of a 50 m3enamel vessel were tested. The deformation occurs in the joint s of the shell and the head. Based on the analysis and testing results, it can b e proved that the stress in the vessel is still at elastic state. The material p roperties are not changed after enameling process time after time. The stress le vel is not affected by little geometric deformations.
展开▼