首页> 中文期刊> 《电镀与精饰》 >钝化工艺对HEDP镀铜层耐蚀性的影响

钝化工艺对HEDP镀铜层耐蚀性的影响

         

摘要

采用盐水浸泡试验、硝酸点滴试验以及电化学测试方法,研究了苯并三氮唑、苯并三氮唑与Cr(Ⅲ)复配、苯并三氮唑与铈盐复配、Cr(Ⅵ)以及HAD无铬钝化工艺对HEDP镀铜层耐蚀性的影响.结果表明,经苯并三氮唑复配钝化液钝化处理后,钝化膜耐蚀性较单一的苯并三氮唑钝化稍有提高,但均不及Cr(Ⅵ)钝化处理,而经HAD无铬钝化处理后,钝化膜耐硝酸点滴时间最长,在3.5% NaCl溶液中的Rct最大,icorr最小,耐蚀性明显优于Cr(Ⅵ)钝化处理.%The effects of BTA,BTA/trivalent chromium complexes,BTA/cerium salt complexes,hexavalent chromium and HAD chromium-free passivation process on corrosion resistance of HEDP copper plating layer were studied by salt leaching test,nitric acid titrating test and electrochemical test method.The results showed that corrosion resistance of the passivation film obtained in BTA compound passivation solution was slightly improved as compared with that obtained in single BTA passivation solution,but all of them were not as good as that obtained in hexavalent chromium passivation solution.For the passivation film treated with HAD chromium-free passivation solution,its nitric acid titrating time was the longest,Rct in 3.5% NaCl was the largest while icorr was the smallest.Compared with hexavalent chromium passivation solution,corrosion resistance of the paasivation film obtained in HAD chromium-free passivation solution was significantly improvod.

著录项

  • 来源
    《电镀与精饰》 |2017年第4期|29-33|共5页
  • 作者单位

    南昌航空大学轻合金加工科学与技术国防重点学科实验室,江西南昌330063;

    南昌航空大学轻合金加工科学与技术国防重点学科实验室,江西南昌330063;

    南昌航空大学轻合金加工科学与技术国防重点学科实验室,江西南昌330063;

    沈阳飞机工业(集团)有限公司制造工程部,辽宁沈阳110034;

    沈阳飞机工业(集团)有限公司制造工程部,辽宁沈阳110034;

    沈阳飞机工业(集团)有限公司制造工程部,辽宁沈阳110034;

    深圳市海田鑫科技有限公司,广东深圳518112;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 金属表面防护技术;
  • 关键词

    HEDP镀铜层; 耐蚀性; 无铬钝化; 极化曲线; 交流阻抗谱;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号