首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >New System for Measuring Impact Vibration on Floor Decking Sheets
【2h】

New System for Measuring Impact Vibration on Floor Decking Sheets

机译:用于测量地板装饰板上冲击振动的新系统

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Currently, there is a narrow range of materials that are used as attenuators of impact noise and building vibrations. Materials used in construction, such as elastic materials, must meet the requirement of having very low elastic modulus values. For the determination of the material's elastic modulus and the acoustic insulation of the same, costly and difficult to execute testing is required. The present paper exposes an alternative system that is simpler and more economic, consisting of a predefined striking device and a sensor able to determine, once the strike is produced, the energy absorbed by the plate. After the impact is produced, the plate undergoes a deformation, which absorbs part of the energy, the remaining part being transmitted to the slab and, at the same time, causing induced airborne noise in the adjoining room. The plate absorbs the power through its own deformation, which is measured with the help of a capacitive sensor. This way, it would be possible to properly define the geometry of the plates, after the execution of the test, and we will try to establish a relationship between the values proposed in this research and the acoustic behavior demanded by the Spanish standards.
机译:当前,有少量材料用作冲击噪声和建筑物振动的衰减器。建筑中使用的材料(例如弹性材料)必须满足具有非常低的弹性模量值的要求。为了确定材料的弹性模量和材料的隔音性,需要昂贵且难以执行的测试。本文提出了一种更简单,更经济的替代系统,该系统由预定义的打击装置和传感器组成,该传感器一旦发生撞击就会确定板吸收的能量。产生冲击后,板会发生变形,吸收一部分能量,其余部分传递到平板上,同时在相邻的房间中引起空气传播的噪声。板通过自身变形吸收能量,该变形借助电容传感器进行测量。这样,可以在执行测试后正确定义板的几何形状,并且我们将尝试在本研究中提出的值与西班牙标准要求的声学性能之间建立关系。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号