...
首页> 外文期刊>American journal of applied sciences >Length Measurement of Long Gauge Blocks by Interferometer
【24h】

Length Measurement of Long Gauge Blocks by Interferometer

机译:干涉仪长度计块的长度测量

获取原文
获取原文并翻译 | 示例
           

摘要

A gauge block interferometer with a vacuum chamber was designed and constructed for the measurement of gauge block lengths between 10 to 1,000 mm. In the chamber, four gauge blocks under the length measurement can be mounted on the measuring table. Furthermore, the length of all four gauge blocks can be measured continuously in one measurement. In this study, four gauge blocks with the nominal length of 125, 200, 400 and 500 mm were used for the length measurement. The environment parameters in the vacuum chamber including temperature, pressure, relative humidity and CO_2 concentration were measured. The refractive index of air which depends on environment parameters was determined by using updated Edlen equation. Then, the lengths of four gauge blocks were measured and found to be 125.00025, 200.00019, 400.00070 and 500.00064, respectively.
机译:设计并构造具有真空室的规格块干涉仪,用于测量量块长度在10至1,000mm之间。在腔室中,在长度测量下的四个规格块可以安装在测量台上。此外,可以在一次测量中连续测量所有四个规格块的长度。在本研究中,使用标称长度为125,200,400和500mm的四个规格块用于长度测量。测量真空室中的环境参数,包括温度,压力,相对湿度和CO_2浓度。通过使用更新的EDLEN方程确定取决于环境参数的空气的折射率。然后,测量四个规格块的长度,分别为125.00025,200.00019,400.00070和500.00064。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号