• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>IEEE Transactions on Applied Superconductivity >Design of the Passive Transmission Lines for Different Stripline Widths and Impedances
【24h】

Design of the Passive Transmission Lines for Different Stripline Widths and Impedances

机译：不同带状线宽度和阻抗的无源传输线的设计

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In this paper, a practical method for designing of passive transmission lines (PTLs) in different widths ranging from 5 to 20 μm with their respective driver and receiver circuits is demonstrated. The striplines were simulated with a microwave analyzing tool and their equivalent circuit models were extracted. Then, this model is used to design the driver and receiver circuits by analytical calculations. Circuits were fabricated at the AIST STP2 process and bias margins and bit error rates were measured in a closed cycle cryocooler system. In order to compensate the critical current's global shift in the fabrication, the tests were carried out in two different temperatures of 4.2 and 4.7 K. We have achieved 10% and 30% margins for receiver and driver circuits, respectively, for 20-μm width striplines.
机译：本文介绍了一种实用的设计无源传输线（PTL）的实用方法，这些无源传输线的宽度分别为5至20μm，并具有各自的驱动器和接收器电路。用微波分析工具模拟带状线，并提取其等效电路模型。然后，该模型用于通过分析计算来设计驱动器和接收器电路。在AIST STP2工艺下制造电路，并在闭环低温冷却器系统中测量偏置裕度和误码率。为了补偿制造过程中关键电流的整体偏移，在4.2和4.7 K的两个不同温度下进行了测试。对于20μm的宽度，我们分别为接收器和驱动器电路实现了10％和30％的裕度带状线。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号