首页> 外文期刊>IEEE Transactions on Applied Superconductivity >Fabrication of biaxially textured Ni substrates and LaNiO/sub 3/ buffer layers for Tl-1223 thick films
【24h】

Fabrication of biaxially textured Ni substrates and LaNiO/sub 3/ buffer layers for Tl-1223 thick films

机译:用于Tl-1223厚膜的双轴织构Ni衬底和LaNiO / sub 3 /缓冲层的制造

获取原文
获取原文并翻译 | 示例
           

摘要

We have fabricated cube texture nickel substrates and examined the relationship between percentage rolling deformation and annealing conditions on the degree of texture obtained using XRD and EBSD techniques. We have found that unaligned grains may be avoided by rolling to 95% reduction and annealing at 800/spl deg/C for 4 hours. We have fabricated LaNiO/sub 3/ films on YSZ and lanthanum aluminate by spray pyrolysis and achieved cube texture in thin coatings.
机译:我们已经制作了立方织构的镍基体,并检查了轧制变形百分率和退火条件之间的关系,这些百分率是使用XRD和EBSD技术获得的织构程度。我们发现,通过轧制至95%的压下率并在800 / spl deg / C的温度下退火4小时,可以避免未排列的晶粒。我们通过喷雾热解在YSZ和铝酸镧上制备了LaNiO / sub 3 /膜,并在薄涂层中获得了立方织构。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号