...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Autex Research Journal >Preparation of Silicone-Modified Acrylate Latex and its Application for Low-Emission Printing of PET Fibre
【24h】

Preparation of Silicone-Modified Acrylate Latex and its Application for Low-Emission Printing of PET Fibre

机译：有机硅改性丙烯酸酯胶乳的制备及其在PET纤维低排放印刷中的应用

获取原文
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Attempts were made to find a more environmentally friendly technique for the printing of polyester (PET ) fabric, acting as an alternative to a usual disperse dye direct-printing process by using a plenty of water and salt and producing effluent contaminants. The low-emission printing technique includes the recipe containing disperse dye paste, synthetic thickener and the water-based silicone-modified acrylate and high-temperature curing process. The water-based silicone-modified acrylate for adhesive coating of polyester (PET) fibres was synthesized using butyl acrylate (BA), eight four methyl siloxane (D4), acrylonitrile (AN), styrene (St), methyl acrylic acid (MAA) and N-methylol acrylamide (NMA).The results showed that the silicone-modified acrylate adhesive could increase the percentages of dye fixation and the colour strength. The superior colour fastness (≥level 4) with the low-emission printing process was realized. The wastewater stream produced by the technique had a residual dye concentration of 2.62 mg/L, which was reduced by approximately 19 times that produced by traditional direct printing. The effluent wastewater drainage was reduced by 76.9%.
机译：试图找到一种对聚酯（PET）织物进行印刷的更加环保的技术，该技术通过使用大量的水和盐并产生废水污染物，来代替常规的分散染料直接印刷工艺。低排放印刷技术包括含有分散染料浆料，合成增稠剂和水基有机硅改性丙烯酸酯以及高温固化工艺的配方。使用丙烯酸丁酯（BA），八种四甲基硅氧烷（D4），丙烯腈（AN），苯乙烯（St），甲基丙烯酸（MAA）合成用于聚酯（PET）纤维粘合剂涂层的水性有机硅改性丙烯酸酯结果表明，有机硅改性的丙烯酸酯胶粘剂可以提高固色率和色强度。实现了低排放印刷过程中优异的色牢度（≥4级）。通过该技术产生的废水流的残留染料浓度为2.62 mg / L，与传统直接印刷产生的染料相比，减少了约19倍。废水排放减少了76.9％。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号