...
首页> 外文期刊>Materials >Evaluation of Toluene Adsorption Performance of Mortar Adhesives Using Porous Carbon Material as Adsorbent
【24h】

Evaluation of Toluene Adsorption Performance of Mortar Adhesives Using Porous Carbon Material as Adsorbent

机译:以多孔碳材料为吸附剂评价砂浆胶粘剂对甲苯的吸附性能

获取原文
           

摘要

Porous carbon materials are advantageous in adsorbing pollutants due to their wide range of specific surface areas, pore diameter, and pore volume. Among the porous carbon materials in the current study, expanded graphite, xGnP, xGnP C-300, xGnP C-500, and xGnP C-750 were prepared as adsorbent materials. Brunauer–Emmett–Teller (BET) analysis was conducted to select the adsorbent material through the analysis of the specific surface area, pore size, and pore volume of the prepared porous carbon materials. Morphological analysis using SEM was also performed. The xGnP C-500 as adsorbent material was applied to a mortar adhesive that is widely used in the installation of interior building materials. The toluene adsorption performances of the specimens were evaluated using 20 L small chamber. Furthermore, the performance of the mortar adhesive, as indicated by the shear bond strength, length change rate, and water retention rate, was analyzed according to the required test method specified in the Korean standards. It was confirmed that for the mortar adhesives prepared using the xGnP C-500 as adsorbent material, the toluene adsorption performance was excellent and satisfied the required physical properties.
机译:多孔碳材料由于其比表面积,孔径和孔体积的广泛范围而在吸附污染物方面具有优势。在当前研究的多孔碳材料中,膨胀石墨,xGnP,xGnP C-300,xGnP C-500和xGnP C-750被制备为吸附材料。通过对制备的多孔碳材料的比表面积,孔径和孔体积的分析,进行了布鲁瑙尔-埃默特-泰勒(BET)分析,以选择吸附材料。还使用SEM进行了形态分析。 xGnP C-500作为吸附剂材料被应用于广泛用于室内建筑材料安装的灰浆粘合剂中。使用20 L小室评估样品的甲苯吸附性能。此外,根据韩国标准中规定的要求的测试方法,分析了砂浆粘合剂的性能,如剪切粘合强度,长度变化率和保水率。已证实对于使用xGnP C-500作为吸附材料制备的砂浆粘合剂,甲苯吸附性能优异并且满足所需的物理性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号