...
首页> 外文期刊>Engineering in Miniature >A Revised Construction Method for 'Minnie' Wheels
【24h】

A Revised Construction Method for 'Minnie' Wheels

机译:修订的“米妮”车轮构造方法

获取原文
获取原文并翻译 | 示例
           

摘要

Scuff one side of the hub, and the back of the spider, degrease and bond the two together, using 6mm long countersunk screws. Insert the dowel pin before fully tightening, then remove and clean it. Take special care to remove any excess adhesive around the hub, but ensure that enough epoxy finds its way into the threads to act as a screwlock. At this stage you could bond an outer spider to another pear, just like the rear one. It will be found useful to draw a pencil or fine marker line along the centre of each spoke, to assist in correct alignment later.
机译:用6毫米长的沉头螺钉将轮毂的一侧和星形轮的背面擦伤,将两者脱脂并粘合在一起。在完全拧紧之前,插入销钉,然后将其卸下并清洁。请特别小心,以除去轮毂周围多余的粘合剂,但要确保有足够的环氧树脂进入螺纹中,以起到螺纹锁的作用。在这个阶段,您可以将一个外蜘蛛绑定到另一个梨,就像后一个一样。沿着每个辐条的中心画一条铅笔或细记号笔线会很有用,有助于以后正确对齐。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号