...
首页> 外文期刊>Engineering in Miniature >BINDING VOLUME 29 OF ENGINEERING IN MINIATURE
【24h】

BINDING VOLUME 29 OF ENGINEERING IN MINIATURE

机译:小型工程中的装订量29

获取原文
获取原文并翻译 | 示例
           

摘要

As is our usual practice, we have again been able to arrange for the bulk binding of readers' copies of Engineering in Miniature. These bindings will be to the same standards as the previous volumes with the same quality cloth and blocking. The cost of this binding service has risen slightly to £16.75. If you wish to have your volume bound, the procedure is as follows: 1. First check very carefully that your magazines are suitable for binding; that is to say they should not be damaged in any way since even creased corners will result in the binding machinery rejecting them. Replacement copies of the magazine are available should you have any copies which are not of an acceptable standard for binding and these can be obtained from our back issues department. The magazine will be bound in the traditional manner and therefore the condition of the cover and advertising pages is not important - you need only concern yourself with checking the actual text pages. If you wish to detach the front cover and advertisements, this should be done with great care and the wire staples left in place. Having done this, please then mark the code number, which you will receive from us, in pencil on the top right hand corner of the beginning of the text pages of each issue. This will enable us to identify your particular volume when it is bound.
机译:按照我们的常规做法,我们再次能够安排读者对微型工程读本的批量装订。这些装订将采用与以前的卷相同的标准,并使用相同质量的布料和块料。这项装订服务的费用略增至16.75英镑。如果要装订,请执行以下步骤:1.首先非常仔细地检查杂志是否适合装订;也就是说,无论如何都不应损坏它们,因为即使弯折的角落也会导致装订机将它们拒之门外。如果您有任何装订标准不可接受的副本,可以从该杂志的后发行部门获得该杂志的替换副本。杂志将以传统方式装订,因此封面和广告页的条件并不重要-您只需要检查实际的文字页即可。如果您要拆下前盖和广告,则应格外小心,并将电线钉留在原处。完成此操作后,请在每期文本页开头的右上角用铅笔标记您将从我们收到的代码号。这将使我们能够在绑定时识别您的特定体积。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号