Optimal design of injection mold for plastic bonded magnet

Nakata T.; Takahashi N.

首页> 外文期刊>IEEE Transactions on Magnetics >Optimal design of injection mold for plastic bonded magnet

【24h】

Optimal design of injection mold for plastic bonded magnet

机译：塑料粘结磁铁注射模的优化设计

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

The optimal design of an injection mold for producing a stronger multipole magnet is carried out using the finite element method and the direct search method. It is shown that the maximum flux density in the cavity obtained by the optimal design is about 2.6 times higher than that of the initial shape determined empirically. 3-D analysis of the nonlinear magnetic field in the injection mold with complicated structure is also carried out. The calculated flux distribution on the cavity surface is in good agreement with the measured one.

机译：使用有限元法和直接搜索法对用于制造更坚固的多极磁体的注塑模具进行了优化设计。结果表明，通过最佳设计获得的腔体中的最大磁通密度比凭经验确定的初始形状高约2.6倍。还对结构复杂的注塑模具中的非线性磁场进行了3-D分析。计算出的腔表面通量分布与测得的通量分布非常吻合。

著录项

来源
《IEEE Transactions on Magnetics》 |1991年第6期|P.4992-4994|共3页
作者
Nakata T.; Takahashi N.;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类磁性材料、铁氧体;
关键词

相似文献

外文文献
中文文献
专利

1. The Optimum Design of Tool Path and Dimensional Accuracy for the Plastic Injection Mold [J] . Rong-Shean Yang, Chi-Tsun Huan 鑄造工程學刊 . 2005,第4期

机译：注塑模具的刀具路径和尺寸精度的优化设计
2. Determination of optimal parting directions in plastic injection mold design [J] . A. Y. C. Nee, M. W. Fu, J. Y. H. Fuh, CIRP Annals . 1997,第1期

机译：确定注塑模具设计中的最佳分模方向
3. Fabrication of Plano-Concave Plastic Lens by Novel Injection Molding Using Carbide-Bonded Graphene-Coated Silica Molds [J] . Liu Xiaohua, Zhang Lin, Zhou Wenchen, Journal of manufacturing science and engineering: Transactions of the ASME . 2019,第8期

机译：用碳化物粘结的石墨烯 - 涂层二氧化硅模具通过新型注射成型制造平面凹塑性透镜
4. Design of Metal Mold with Closed Magnetic Circuit Using Plastic-Bonded Anisotropic Magnet [C] . Yoshihiko.Matsuyama, Hong-yang Zhao, Dong-Ying Ju International workshop on rare-earth magnets and their applications;International symposium on magnetic anisotropy and coercivity in rare-earth transition metal alloys . 2000

机译：粘结塑料各向异性磁体的闭合磁路金属模具设计
5. Optimizing flow of plastic PBT with 45% glass and mineral fiber reinforcement in an injection over mold process using Taguchi, CPK and mold flow simulation software approaches [D] . Sanchez Urbina, Israel 2009

机译：使用Taguchi，CPK和模具流动模拟软件方法，在注模过程中使用45％的玻璃纤维和矿物纤维增强来优化塑料PBT的流动
6. Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts [O] . Joo Seong Sohn, Sung Woon Cha 2018

机译：化学改性对木塑复合材料注塑件力学性能的影响
7. Optimal design of injection mold for plastic bonded magnet [O] . Nakata, Takayoshi, Takahashi, N., Fujiwara, K., 1991

机译：塑料粘结磁铁注射模的优化设计
8. Design and Fabrication of Injection Molded Plastic Optics with Nano-CADCAM [R] . Seiichiro Kitagawa, Takatoshi Suzuki, Youichi Iizuka 1997

机译：纳米CaDCam注塑成型塑料光学元件的设计与制作

Optimal design of injection mold for plastic bonded magnet

摘要

著录项

相似文献

相关主题

期刊订阅