• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>International journal of ambient energy >Modelling and simulation of single- and triple-junction solar cells using MATLAB/SIMULINK
【24h】

Modelling and simulation of single- and triple-junction solar cells using MATLAB/SIMULINK

机译：使用MATLAB / SIMULINK对单结和三结太阳能电池进行建模和仿真

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The main objective of this paper is to determine the single- and triple-junction solar cells' l-V and P-V curves, define maximum voltage, current, and power. The paper demonstrates and analyses different environmental conditions that affect the solar cells, such as temperature and irradiance. The performance of single- and triple-junction solar cells is evaluated by analysing the fill factor. In this work, the analysis of single- and triplejunction solar cells is carried out through software simulation. Different conditions ing the solar cell behaviour under variation of temperature between 15°C (288.315 K) and 45°C (318.15 K) for the single-junction cell and between 268.15 K (-5°C) and 348.15 K (75°C) for the triple-junction cell to observe the effect of temperature on open circuit voltage, the variation of different levels of irradiance to observe its effect on open circuit voltage and current density on both cell types, and cell performance evaluation using the fill factor concept. Practical results used in this paper are obtained from Clyde Space's laboratories. Tests of Clyde Space were done using halide lamps to simulate the irradiation conditions with irradiance of half sun which is equivalent to 0.05 Wcm~(-2). The operation was done under temperature of 40°C which is equivalent to 313.15 K.
机译：本文的主要目的是确定单结和三结太阳能电池的I-V和P-V曲线，定义最大电压，电流和功率。本文演示并分析了影响太阳能电池的不同环境条件，例如温度和辐照度。通过分析填充因子，可以评估单结和三结太阳能电池的性能。在这项工作中，通过软件仿真对单结和三结太阳能电池进行了分析。单结电池在15°C（288.315 K）和45°C（318.15 K）之间以及268.15 K（-5°C）和348.15 K（75°C）之间的温度变化下，太阳能电池性能的不同条件），以便于三结电池观察温度对开路电压的影响，不同辐照度的变化以观察两种类型电池对开路电压和电流密度的影响，并使用填充因子概念评估电池性能。本文使用的实际结果是从Clyde Space的实验室获得的。使用卤化物灯对克莱德空间进行了测试，以模拟半日照度等于0.05 Wcm〜（-2）的辐照条件。该操作是在40°C的温度下完成的，该温度等于313.15 K.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号