CRITICAL EQUILIBRIUM STATE OF A BUSHING IN A CONTACT PAIR WITH CRACKS POSSESSING PLASTIC TIP ZONES

V. M. Mirsalimov

首页> 外文期刊>Journal of Applied Mechanics and Technical Physics >CRITICAL EQUILIBRIUM STATE OF A BUSHING IN A CONTACT PAIR WITH CRACKS POSSESSING PLASTIC TIP ZONES

【24h】

CRITICAL EQUILIBRIUM STATE OF A BUSHING IN A CONTACT PAIR WITH CRACKS POSSESSING PLASTIC TIP ZONES

机译：裂纹占据塑料尖端区的接触对中的衬套的临界平衡态。

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

The problem of mechanics of contact fracture is considered for a bushing in a friction pair. It is assumed that multiple reciprocating motion of the plunger leads to fracture of the bushing material owing to friction caused by contact interaction and accompanied by the joint effect of loading and temperature. It is assumed that there are several arbitrarily located straight-line cracks with tip zones near the contact surface of the bushing. The stress state of the bushing is examined in the presence of regions where the crack faces (or some part of them) come into contact.

机译：对于摩擦副中的衬套，考虑了接触断裂的力学问题。假定由于接触相互作用引起的摩擦并伴随着载荷和温度的共同作用，柱塞的多次往复运动导致衬套材料断裂。假定在套管的接触表面附近有几个任意分布的直线裂纹，其尖端区域。在裂纹面（或其中一部分）接触的区域中检查衬套的应力状态。

著录项

来源
《Journal of Applied Mechanics and Technical Physics》 |2006年第5期|p.736-746|共11页
作者
V. M. Mirsalimov;
展开▼
作者单位

Azerbaijan Technical University, Baku, Azerbaijan AZ1073;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类应用力学;
关键词
bushing in a contact pair; fracture; crack; plastic flow;

机译：接触对中的套管;断裂;裂纹;塑性流动;

相似文献

外文文献
中文文献
专利

1. Combined Bending with Tension of Isotropic Plate with Crack Considering Crack Banks Contact and Plastic Zones at its Tops [J] . Heorgij Sulym, Viktor Opanasovych, Mykola Slobodian, Acta Mechanica et Automatica . 2018,第2期

机译：考虑到裂纹库接触和顶部塑性区的等向板的弯曲与弯曲的组合弯曲
2. Simulation of bridged crack closure in a contact pair bushing [J] . Mirsalimov VM Mechanics of solids . 2009,第2期

机译：接触对套管中桥接裂纹闭合的仿真
3. CRACK CLOSURE IN THE BUSH OF A CONTACT PAIR [J] . V. M. Mirsalimov Journal of Machinery Manufacture and Reliability . 2005,第4期

机译：接触对衬套中的裂纹闭合
4. Crack Growth and Plastic,Fracture Process and Damage Zones Behavior Under Mixed Mode Loading [C] . Valery Shlyannikov, Daria Fedotova International Conference on Theoretical, Applied and Experimental Mechanics . 2020

机译：混合模式载荷下裂纹生长和塑料，断裂过程和损伤区行为
5. Critical digital literacies: Following feminist composition theories into twenty-first century contact zones [D] . Blackburn, Jessica B. 2010

机译：批判性的数字文学：将女权主义构成理论纳入二十一世纪的接触地区
6. Numerical validation data of tensile stress zones and crack zones in bamboo reinforced concrete beams using the Fortran PowerStation 4.0 program [O] . Muhtar 2020

机译：使用Fortran PowerStation 4.0程序对竹骨钢筋混凝土梁中的张应力区域和裂缝区域进行数值验证的数据
7. Bend of izotropic plate with two indentical co-axial open cracks at plastic zones meeting between them taking into account the contact of crack banks [O] . Опанасович Віктор Костянтинович, Слободян Микола Степанович, Opanasovich Victor, 2015

机译：考虑到裂纹库的接触，各向同性板的弯曲在塑料区相交处具有两个相同的同轴开放裂纹
8. Evolution and Stability of a Crack with a Process Zone. Experimental andTheoretical Studies. Two Parameter Crack Layer Model: Equilibrium, Evolution, Stability. Aging Phenomena and the Intrinsic Material Geometry [R] . Chudnovsky, A., Shulkin, Y., Preston, S. 1996

机译：带加工区裂纹的演化与稳定性。实验和理论研究。两参数裂缝层模型：平衡，演化，稳定性。衰老现象与内在物质几何

CRITICAL EQUILIBRIUM STATE OF A BUSHING IN A CONTACT PAIR WITH CRACKS POSSESSING PLASTIC TIP ZONES

摘要

著录项

相似文献

相关主题

期刊订阅