首页> 外文期刊>Journal of Polymers and the Environment >Synergistic Effect of Titanium Dioxide (TiO_2) and Ionizing Radiation on Thermal and Mechanical Properties of Carboxymethyl Cellulose (CMC) for Potential Application in Removal of Basic Dye from Wastewater
【24h】

Synergistic Effect of Titanium Dioxide (TiO_2) and Ionizing Radiation on Thermal and Mechanical Properties of Carboxymethyl Cellulose (CMC) for Potential Application in Removal of Basic Dye from Wastewater

机译:二氧化钛(TiO_2)和电离辐射对羧甲基纤维素(CMC)热和力学性能的协同作用,用于潜在应用中的废水除去碱性染料的潜在应用

获取原文
获取原文并翻译 | 示例
           

摘要

Carboxymethyl cellulose (CMC)/titanium dioxide (TiO2) was prepared using gamma irradiation at different doses. Carboxymethyl cellulose was used as a matrix and TiO2 in different contents was added (0.25, 0.5, 1, 1.5 wt%) as a filler. The polymer composite films were irradiated at doses of 5, 10 and 15 kGy using Co-60 gamma-ray to form crosslinked network structure. The prepared composite films were described by different diagnostic procedures including X-ray diffractometer, scanning electron microscope (SEM), FTIR as well as thermal and mechanical properties measurements. CMC/TiO2 composite films were used for removal of basic Violet 7 dye. The adsorption of the dye match with the Langmuir model across chemical monolayer adsorption performance. Adsorption kinetic of dyes was set up to be regular to pseudo second order kinetic model. The results showed that the prepared composite films significantly removed this basic violet 7 dye with maximum absorption capacity (123.6 mg/g).
机译:使用不同剂量的γ辐射制备羧甲基纤维素(CMC)/二氧化钛(TiO 2)。 羧甲基纤维素用作基质,加入不同内容物中的TiO 2(0.25,0.5,1,1.5wt%)作为填料。 使用CO-60γ射线以5,10和15kGy的剂量照射聚合物复合膜,形成交联网络结构。 通过不同的诊断程序描述了制备的复合膜,包括X射线衍射仪,扫描电子显微镜(SEM),FTIR以及热和机械性能测量。 CMC / TiO2复合膜用于除去碱性紫罗兰7染料。 染料匹配与化学单层吸附性能的Langmuir模型的吸附。 染料的吸附动力学被设定为定期的伪二阶动力学模型。 结果表明,制备的复合薄膜具有最大吸收能力(123.6mg / g)的这种基本紫紫罗兰7染料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号