• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of porous materials >The conversion of wood residues, using pilot-scale technologies, into porous activated biochars for supercapacitors
【24h】

The conversion of wood residues, using pilot-scale technologies, into porous activated biochars for supercapacitors

机译：使用中试规模技术将木材残留物转化为用于超级电容器的多孔活化生物炭

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In this study, activated biochar was produced using pilot-scale technologies of fast pyrolysis and activation to create desirable morphology, surface chemistry, and adsorptive properties for application in supercapacitors. First, residues from white birch were converted into biochar by fast pyrolysis (~ 450 degrees C). Then, physical (using CO2) or chemical (using KOH) activation was carried out in a homemade pilot-scale furnace at 900 degrees C. These synthesized materials presented distinct porosity structures: micro-/mesoporous (CO2 material) and highly microporous (KOH material), reaching surface areas of up to 1700 m(2) g(-1). Electrochemical results showed that KOH-activated biochar had higher specific electrical capacitance in both acidic and neutral electrolytes with a maximum specific capacitance value of 350 and 118 F g(-1) at 1 A g(-1), respectively; while, for CO2-activated biochar, the maximum obtained values were 204 and 14 F g(-1). The greater proportion of oxygenated and nitrogenated functional groups on the surface of the KOH activated biochar, along with its high surface area (with wider porosity), improved its performance as a supercapacitor electrode. Specifically, the low proportion of ultramicropores was determinant for its better electrochemical behavior, especially in the neutral electrolyte. Indeed, these results are similar to those found in the literature on the electrical capacitance of carbonaceous materials synthesized in a small-scale furnace. Thus, the chemical-activated biochar made from wood residues in pilot-scale furnaces is a promising material for use as electrodes for supercapacitors.
机译：在这项研究中，使用快速热解和活化的中试规模技术生产活化的生物炭，以产生所需的形态，表面化学和吸附性能，以用于超级电容器。首先，白桦的残留物通过快速热解（约450摄氏度）转化为生物炭。然后，在900摄氏度的自制中试炉中进行了物理（使用CO2）或化学（使用KOH）活化。这些合成的材料呈现出不同的孔隙结构：微孔/中孔（CO2材料）和高微孔（KOH）材料），达到的最大表面积为1700 m（2）g（-1）。电化学结果表明，KOH活化的生物炭在酸性和中性电解液中均具有较高的比电容，在1 A g（-1）时的最大比电容值分别为350和118 F g（-1）。而对于CO2活化的生物炭，最大获得值为204和14 F g（-1）。 KOH活化生物炭表面上较大比例的氧化和氮化功能基团，以及其高表面积（具有更大的孔隙率），改善了其作为超级电容器电极的性能。特别地，低比例的超微孔是决定其更好的电化学性能的决定因素，尤其是在中性电解质中。实际上，这些结果与在小型炉中合成的含碳材料的电容的文献中发现的结果相似。因此，在中试炉中由木材残留物制成的化学活化生物炭是一种有前途的材料，可用作超级电容器的电极。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号