Over the last 10 years, a series of modifications, leading to an increase of productivity in the Sidmar steelplant, were put in operation. For the BOF, the capacity increase is obtained by reducing the tap-to-tap time of the vessel and by introduction of calculation models originally leading to quick tapping. Downgrades due to chemical composition were reduced drastically at the same time. By the end of 1998 even direct tapping was introduced. Presently this allows the production of more than 4.25 million metric tons of liquid steel per year (one vessel out of two in operation).%Pendant les dix dernières années, beaucoup de changements ont été faits à l'aciérie de Sidmar pour augmenter la productivité. Pour le convertisseur, cette montée en capacité a été réalisée en réduisant le temps de cycle du convertisseur et en introduisant des modèles numériques pour contrôler le processus. Cela a résulté dans le « quick tap ». Fin 1998, on a même pu introduire le rabattement direct. Pour le moment, une capacité de 4,25 Mt d'acier liquide par an peut être réalisée avec un convertisseur sur deux en production.
展开▼