机译:样品取向和初始微观结构对镁合金动态再结晶的影响
School of Aerospace, Mechanical & Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia;
School of Aerospace, Mechanical & Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia;
School of Aerospace, Mechanical & Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia;
Centre for Innovative Structures and Materials, School of Engineering, RMIT University, Melbourne, VIC 3000, Australia;
Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, VIC 3122, Australia;
College of Materials Science and Engineering, Hunan University, Changsha 410082, China;
College of Materials Science and Engineering, Hunan University, Changsha 410082, China;
School of Aerospace, Mechanical & Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia,Australian Institute for Nanoscale Science and Technology, The University of Sydney, NSW 2006, Australia;
School of Aerospace, Mechanical & Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia;
Magnesium alloys; Grain orientation; Dynamic recrystallization; Twinning; Dislocation;
机译:初始晶粒尺寸对AZ31镁合金动态再结晶晶粒尺寸的影响
机译:轧制参数对AZ31镁合金薄板动态再结晶组织的影响
机译:Influence of rolling parameters on dynamically recrystallized microstructures in AZ31 magnesium alloy sheets
机译:初级晶粒尺寸对镁合金AZ31变形行为及动态再结晶的影响
机译:在铝4镁0.3 dium合金中进行连续动态重结晶过程中运行的机制。
机译:AZ31镁合金薄板动态再结晶行为的关键轧制工艺参数
机译:轧制参数对aZ31镁合金板材动态再结晶组织的影响