• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Materials Science and Engineering >Thermal cycle-dependent metallurgical variations and their effects on the , through-thickness mechanical properties in thick section narrow-gap welds
【24h】

Thermal cycle-dependent metallurgical variations and their effects on the , through-thickness mechanical properties in thick section narrow-gap welds

机译：与热循环有关的冶金变化及其对厚截面窄缝焊缝厚度的影响

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The primary components in pressurised water reactors are manufactured by welding thick sections of either SA508 or SA533 pressure vessel steel using processes such as submerged arc welding (SAW) or gas-tungsten arc welding (GTAW). Narrow-groove (NG) variants of these processes have reduced welding times, but thick-section welds still require a large number of passes. In this work, the effects of a large number of welding thermal cycles on the through-thickness variability in microstructure and mechanical properties have been analysed for NG-GTAW and NG-SAW joints made in 78 mm thick SA533 steel. Microstructures were characterised using optical and scanning electron microscopy, while mechanical properties were captured in cross-weld tensile tests using digital image correlation and through tests on coupons extracted exclusively from the weld metal and from the heat-affected zone. Charpy impact testing was used to assess toughness. While the toughness was relatively consistent throughout the SAW joint, significant through-thickness variations in toughness were observed in the NG-GTAW joint, which can be attributed to the varying degree to which the weldment was tempered by subsequent welding thermal cycles.
机译：压水堆的主要部件是通过使用埋弧焊（SAW）或钨极钨弧焊（GTAW）等工艺焊接SA508或SA533压力容器钢的较厚部分来制造的。这些工艺的窄槽（NG）变型减少了焊接时间，但厚截面焊缝仍需要大量焊道。在这项工作中，对于由78毫米厚的SA533钢制成的NG-GTAW和NG-SAW接头，分析了大量焊接热循环对贯穿厚度的微观组织和力学性能的影响。使用光学和扫描电子显微镜对微结构进行表征，同时在交叉焊接拉伸试验中使用数字图像相关性并通过对仅从焊缝金属和热影响区中提取的试样进行试验来捕获机械性能。夏比冲击试验用于评估韧性。尽管整个SAW接头的韧性相对一致，但在NG-GTAW接头中观察到了贯穿厚度的明显韧性变化，这可以归因于随后的焊接热循环对焊接件回火的不同程度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号