首页> 外文期刊>Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing >Modeling of permeability with the aid of 3D interdendritic flow simulation for equiaxed dendritic structures
【24h】

Modeling of permeability with the aid of 3D interdendritic flow simulation for equiaxed dendritic structures

机译:等轴枝晶结构的3D枝晶间流动模拟辅助渗透率建模

获取原文
获取原文并翻译 | 示例
       

摘要

In this study, the permeability for interdendritic liquid flow through equiaxial mushy zone has been modeled and experimentally measured. In the present work, by applying a virtual dendrite in a micro-domain and solving Navier-Stokes equation, flow pattern around the dendrite has been obtained and then by applying Darcy's law to this 3D domain the permeability has been determined. In this micro-model the influence of solid fraction and geometry of dendrites have been assessed. Numerically determined values of permeabilities have been analyzed by the use of SPSS statistical software. Then an experimental method is used to measure the permeability for flow through equiaxial mushy zone of Pb-Sn alloys in high solid fractions. Results show that increasing the solid fraction and perturbation has been led to decreasing the permeability but unlike the solid fraction, perturbation has less effect on the permeability. The results are in good agreement with the available experimental data and analytical solutions. The empirical relationship presented in this article could be used to estimate permeability in the mushy Pb-Sn alloys.
机译:在这项研究中,树突间液流通过等轴糊状区的渗透率已经过建模和实验测量。在当前工作中,通过在微域中应用虚拟树枝状晶体并求解Navier-Stokes方程,获得了围绕树枝状晶体的流动模式,然后通过将Darcy定律应用于该3D区域,确定了渗透率。在该微模型中,已评估了固形分率和树枝状晶体的几何形状的影响。数值确定的渗透率值已通过使用SPSS统计软件进行了分析。然后,采用实验方法来测量高固含量的Pb-Sn合金等轴糊状流的渗透率。结果表明,增加固体分数和扰动会导致渗透率降低,但与固体分数不同,扰动对渗透率的影响较小。结果与可用的实验数据和分析解决方案高度吻合。本文介绍的经验关系可用于估算糊状Pb-Sn合金的磁导率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号