780-N/mm~2 class high tensile strength steel plates with large-heat-input-welability and low-weld-cracking- susceptibility for architectural construction

Kazushighe Tokuno; Mutsuto Tanaka; Kunio Koyama

首页> 外文期刊>NIPPON STEEL TECHNICAL REPORT >780-N/mm~2 class high tensile strength steel plates with large-heat-input-welability and low-weld-cracking- susceptibility for architectural construction

【24h】

780-N/mm~2 class high tensile strength steel plates with large-heat-input-welability and low-weld-cracking- susceptibility for architectural construction

机译：780-N / mm〜2级高热输入焊接性，低焊接裂纹敏感性的高抗拉强度钢板，用于建筑

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Two steels were developed for use as new 780-N/mm~2 high-tensile strength heavy-gage steel plates (HT780) for super highrise buildings. One (steel A) is a 1.4Ni-B steel mainly designed to ensure the desired toughness of the heat-affected zone (HAZ) of large heat input welds. The other (steel B) is a low C-1.2Cu-1.4Ni-B free steel mainly designed to lower the preheating temperature.

机译：开发了两种钢，作为用于超高层建筑的新型780-N / mm〜2高抗拉强度重型钢板（HT780）。一种（钢A）是1.4Ni-B钢，主要设计用于确保大型热输入焊缝的热影响区（HAZ）的所需韧性。另一种（钢B）是低C-1.2Cu-1.4Ni-B游离钢，主要用于降低预热温度。

著录项

来源
《NIPPON STEEL TECHNICAL REPORT》 |1997年第75期|p.43-50|共8页
作者
Kazushighe Tokuno; Mutsuto Tanaka; Kunio Koyama;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类冶金工业;炼钢;
关键词

相似文献

外文文献
中文文献
专利

1. 780-N/mm2 Class High Tensile Strength Steel Plates with Large-Heat-Input-Weldability and Low-Weld Cracking-Susceptibility for Architectural Construction [J] . K.Tokuno, Y.Okamura Nippon Steel Technical Report . 1997,第75期

机译：780-N / mm2级高热输入焊接性和低焊接开裂敏感性的高抗拉强度钢板
2. High Tensile Strength Steel Plates and Welding Consumables for Architectural Construction with Excellent Toughness in Welded Joint -"JFE EWEL" Technology for Excellent Quality in HAZ of High Heat Input Welded Joints- [J] . KIMURA Tatsumi, SUMI Hiroyuki, KITANI Yasushi JFE technical report . 2005,第5期

机译：焊接接头具有极高韧性的建筑用高抗拉强度钢板和焊接材料-“ JFE EWEL”技术可确保高热输入焊接接头的热影响区具有卓越的品质-
3. Development of 610N/mm~2 class high tensile strength steel plate for multi-purpose tank by using ausformed bainite technology [J] . Tomoya KAWABATA, Kimihisa YUMINO, Hiroshi KATSUMOTO 圧力技術 . 2002,第6期

机译：利用奥氏体贝氏体技术开发610N / mm〜2级高强度罐用高强度钢板
4. ホットワイヤMAG溶接による高張力鋼板高能率溶接技術の検討--ホットワイヤMAG溶接法を用いた高張力厚鋼板高能率·高品質溶接技術の開発（第一報）Investigation of High-efficiency Welding Technique for High-tensile Strength Steel Plate using Hot-wire GMA Welding Method-- Development of High-efficiency High quality Welding Technique for High-tensile Strength Thick-steel Plate using Hot-wire MAG Welding Method (1st Report) [C] . 高木　真登, 山本　元道, 篠崎　賢二, 溶接学会全国大会 . 2015

机译：热线MAG高压钢板高效焊接技术通过焊接热线MAG高张力厚钢板高效率和高质量的焊接技术采用热线MAG焊接方法（第一报告）高效焊接技术研究采用热线GMA焊接方法的高抗拉伸强度钢板 - 使用热线MAG焊接方法开发高效高品质焊接技术，采用热线MAG焊接方法（第1次报告）
5. Combined influence of heat treatment and immersion corrosion on the tensile-shear strength of aluminum-steel explosively welded plates [D] . Oberle, Hugues. 1991

机译：热处理和浸入腐蚀对铝钢爆炸焊接板拉伸剪切强度的综合影响
6. The Influence of Steel Fiber Tensile Strengths and Aspect Ratios on the Fracture Properties of High-Strength Concrete [O] . Won-Chang Choi, Kwon-Young Jung, Seok-Joon Jang, 2019

机译：钢纤维拉伸强度和长宽比对高强度混凝土断裂性能的影响
7. Tensile Strength of Welded Joints for TMCP Type 50kgf/mm2-Class High Tensile Steel Plates [O] . Hiroshi Nitoh, Daisuke Sakai, Hiroshi Yajima, 1985

机译：TMCP型50kGF / MM2级高拉伸钢板焊接接头的拉伸强度

780-N/mm~2 class high tensile strength steel plates with large-heat-input-welability and low-weld-cracking- susceptibility for architectural construction

摘要

著录项

相似文献

相关主题

期刊订阅